# 1 <sub>.</sub>2-V<sub>,</sub> 1 2-/1 0-/8-BIT<sub>,</sub> 200-KSPS/1 00-KSPS<sub>,</sub> M ICRO-POWER<sub>,</sub> M I N IATU RE ANALOG-TO-DIGITAL CONVERTER WITH SERIAL INTERFACE

## FEATU RES

• Si n<sub>g</sub> le 1 <sub>.</sub>2-V to 3<sub>.</sub>6-V Su <sub>pp</sub>l<sub>y</sub> O<sub>p</sub>eration

● H i<sub>g</sub> h Th rou<sub>g</sub> h <sub>p</sub>ut – 200/240/280KSPS for 1 2/1 0/8-Bit $\mathsf { V } _ { \mathsf { D D } } \geq 1 . 6 \mathsf { V }$ – 1 00/1 20/1 40KSPS for 1 2/1 0/8-B it $\mathsf { V } _ { \mathsf { D D } } \geq 1 . 2 \mathsf { V }$

• ±1 <sub>.</sub>5LSB I N L 1 2-Bit N MC (ADS7866)

71 dB SN R –83 dB TH D at $\mathsf { f } _ { \mathsf { I N } } = 3 \mathsf { 0 }$ kHz (ADS7866)

• S<sub>y</sub>nch ron ized Conversion with SCLK

• SPI Com <sub>p</sub>ati ble Serial I nterface

• No Pi <sub>p</sub>el i ne Dela<sub>y</sub>s

• Low Power

– 1 <sub>.</sub>39 mW T<sub>yp</sub> at 200 KSPS $\mathsf { V } _ { \mathsf { D D } } = 3 . 6 \ \mathsf { V }$ – 0<sub>.</sub>39 mW T<sub>yp</sub> at 200 KSPS $\mathsf { V } _ { \mathsf { D D } } = 1 . 6 \mathsf { V }$ – 0<sub>.</sub>22 mW T<sub>yp</sub> at 1 00 KSPS $\mathsf { V } _ { \mathsf { D D } } = 1 . 2 \ : \mathsf { V }$

• Auto Power-Down : 8 nA T<sub>yp</sub> 300 nA Max

• 0 V to $\mathsf { v } _ { \mathsf { D } \mathsf { D } }$ U n i <sub>p</sub>olar I n <sub>p</sub>ut Ran<sub>g</sub>e

• 6-Pi n SOT-23 Packa<sub>g</sub>e

## APPLICATIONS

• Batter<sub>y</sub> Powered S<sub>y</sub>stems

• Isolated Data Ac<sub>q</sub> u isition

• Med ical I nstru ments

• Portable Com m u n ication

• Portable Data Ac<sub>q</sub> u isition S<sub>y</sub>stems

• Automatic Test E<sub>q</sub> u i <sub>p</sub>ment

## DESCRIPTION

The ADS7866/67/68 are low <sub>p</sub>ower m i n iatu re 1 2/1 0/8-bit A/D conve rte rs each with a u n i <sub>p</sub>olar si n<sub>g</sub> le-ended i n <sub>p</sub>ut <sub>.</sub> These devices can o<sub>p</sub>e rate from a si n<sub>g</sub> le 1 <sub>.</sub> 6 V to 3 <sub>.</sub> 6 V su <sub>pp</sub>l<sub>y</sub> with a 200- KS PS th rou <sub>g</sub> h <sub>p</sub> ut fo r ADS7866 <sub>.</sub> I n add ition these devi ces can mai ntai n at l east a 1 00- KS PS th rou <sub>g</sub> h <sub>p</sub> ut with a su <sub>pp</sub>l<sub>y</sub> as low as 1 2 V

The sam <sub>p</sub>l i n<sub>g</sub> conve rsion and activation of d i<sub>g</sub> ital out<sub>p</sub>ut S DO are i n itiated on the fal l i n<sub>g</sub> ed<sub>g</sub>e of CS <sub>.</sub> The se rial clock SC LK is used fo r control l i n<sub>g</sub> the conve rsion rate and sh ifti n<sub>g</sub> data out of the conve rte r Fu rthermore SCLK <sub>p</sub>rovides a mechan ism to al low d i <sub>g</sub> ital host <sub>p</sub> rocesso rs to s<sub>y</sub>nch ron ize with the con - verter These conve rte rs i nte rface wit h m icro-<sub>p</sub> rocesso rs o r DS Ps th rou<sub>g</sub> h a h i<sub>g</sub> h-s<sub>p</sub>eed S P I com <sub>p</sub>ati ble se rial i nte rface <sub>.</sub> The re are no <sub>p</sub>i <sub>p</sub>el i ne dela<sub>y</sub>s associated with the device <sub>.</sub>

The m i n i m u m conve rsion ti me is dete rm i ned b<sub>y</sub> the fre<sub>q</sub> uenc<sub>y</sub> of the se rial clock i n <sub>p</sub>ut SC LK wh i le the maxi m u m fre<sub>q</sub> uenc<sub>y</sub> of SC LK is dete rm i ned b<sub>y</sub> the m i n i m u m sam <sub>p</sub>l i n<sub>g</sub> ti me re<sub>q</sub> u i red to char<sub>g</sub>e the i n <sub>p</sub> ut ca<sub>p</sub>acitance to 1 2/1 0/8-bit accu rac<sub>y</sub> fo r the ADS7866/67/68 res<sub>p</sub>ectivel<sub>y.</sub> The maxi m u m th rou<sub>g</sub> h <sub>p</sub>ut is dete rm i ned b<sub>y</sub> how often a conve rsion is i n itiated when the m i n i m u m sam <sub>p</sub>l i n<sub>g</sub> ti me is met and the maxi m u m SC LK fre<sub>q</sub> uenc<sub>y</sub> is used <sub>.</sub> E ach device automatical l<sub>y p</sub>owe rs down afte r each conve rsion wh ich al lows each device to save <sub>p</sub>owe r when the th rou <sub>g</sub> h <sub>p</sub> ut is red u ced wh i l e usi n<sub>g</sub> the maxi m u m SC LK fre<sub>q</sub> uenc<sub>y.</sub>

The conve rte r refe rence is taken i nte rnal l<sub>y</sub> from the su <sub>pp</sub>l<sub>y.</sub> H ence the analo<sub>g</sub> i n <sub>p</sub>ut ran<sub>g</sub>e fo r these devices is 0 V to $\mathsf { V } _ { \mathsf { D D } }$

These devices are avai lable i n a 6-<sub>p</sub>i n SOT-23 <sub>p</sub>acka<sub>g</sub>e and are characte rized ove r the i nd ustrial –40<sup>°</sup>C to 85<sup>°</sup>C tem <sub>p</sub>eratu re ran<sub>g</sub>e <sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F836286165499bccdee53593d6d5ec28601de10e631a8ddccf8cbfb7f3fa5a656.jpg)

M icro-Power M i n iatu re SAR Converter Fam i l<sub>y</sub>

<table><tr><td>RESOLUTION/SPEED</td><td>&lt; 200 KSPS</td><td>1 MSPS – 1.25 MSPS</td></tr><tr><td>12-Bit</td><td>ADS7866 (1.2 VDD to 3.6 VDD)</td><td>ADS7886 (2.35 VDD to 5.25 VDD)</td></tr><tr><td>10-Bit</td><td>ADS7867 (1.2 VDD to 3.6 VDD)</td><td>ADS7887 (2.35 VDD to 5.25 VDD)</td></tr><tr><td>8-Bit</td><td>ADS7868 (1.2 VDD to 3.6 VDD)</td><td>ADS7888 (2.35 VDD to 5.25 VDD)</td></tr></table>

P lease be aware that an i m <sub>p</sub>o rtant notice conce rn i n<sub>g</sub> avai labi l it<sub>y</sub> standard warrant<sub>y</sub> and use i n critical a<sub>pp</sub>l ications of Texas I nstru ments sem icond ucto r <sub>p</sub> rod ucts and d isclai me rs the reto a<sub>pp</sub>ears at the end of th is data sheet .

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F5abea9433c421444962626f76477578b23fc41e1ad33e91435225a37bb0dc6ac.jpg)

These devices have l i m ited bu i lt-i n E S D <sub>p</sub> rotection The leads shou ld be shorted to<sub>g</sub>ethe r or the device <sub>p</sub>laced i n cond uctive foam d u ri n<sub>g</sub> stora<sub>g</sub>e or hand l i n<sub>g</sub> to <sub>p</sub> revent electrostatic dama<sub>g</sub>e to the MOS <sub>g</sub>ates <sub>.</sub>

ORDERING INFORMATION <sup>(1)</sup>

<table><tr><td>MODEL</td><td>MAXIMUM INTEGRAL LINEARITY (LSB)</td><td>MAXIMUM DIFFERENTIAL LINEARITY (LSB)</td><td>NO MISSING CODES RESOLUTION (BIT)</td><td>PACKAGE TYPE</td><td>PACKAGE MARKING (SYMBOL)</td><td>PACKAGE DESIGNATOR</td><td>SPECIFIED TEMPERATURE RANGE</td><td>ORDERING NUMBER</td><td>TRANSPORT MEDIA, QUANTITY</td></tr><tr><td>ADS7866I</td><td>±1.5</td><td>-1/+1.5</td><td>12</td><td>SOT23-6</td><td>A66Y</td><td>DBV</td><td>-40°C to 85°C</td><td>ADS7866IDBVT</td><td>Small tape and reel, 250</td></tr><tr><td>ADS7866I</td><td>±1.5</td><td>-1/+1.5</td><td>12</td><td>SOT23-6</td><td>A66Y</td><td>DBV</td><td>-40°C to 85°C</td><td>ADS7866IDBVR</td><td>Tape and reel, 3000</td></tr><tr><td>ADS7867I</td><td>±0.5</td><td>±0.5</td><td>10</td><td>SOT23-6</td><td>A67Y</td><td>DBV</td><td>-40°C to 85°C</td><td>ADS7867IDBVT</td><td>Small tape and reel, 250</td></tr><tr><td>ADS7867I</td><td>±0.5</td><td>±0.5</td><td>10</td><td>SOT23-6</td><td>A67Y</td><td>DBV</td><td>-40°C to 85°C</td><td>ADS7867IDBVR</td><td>Tape and reel, 3000</td></tr><tr><td>ADS7868I</td><td>±0.5</td><td>±0.5</td><td>8</td><td>SOT23-6</td><td>A68Y</td><td>DBV</td><td>-40°C to 85°C</td><td>ADS7868IDBVT</td><td>Small tape and reel, 250</td></tr><tr><td>ADS7868I</td><td>±0.5</td><td>±0.5</td><td>8</td><td>SOT23-6</td><td>A68Y</td><td>DBV</td><td>-40°C to 85°C</td><td>ADS7868IDBVR</td><td>Tape and reel, 3000</td></tr></table>

( 1 ) Fo r the most cu rrent package and o rde ri ng i nfo rmation <sub>,</sub> see the Package Option Addend u m at the end of th is docu ment <sub>,</sub> o r see the TI web site at www ti com

## ABSOLUTE MAXIMUM RATINGS

ove r ope rati ng free-ai r tem pe ratu re range (u n less othe rwise noted)

<table><tr><td colspan="2"></td><td>RATING</td></tr><tr><td colspan="2"> $V_{DD}$  to GND</td><td>-0.3 V to 4.0 V</td></tr><tr><td colspan="2">Analog input voltage to GND</td><td>-0.3 V to  $V_{DD}$  + 0.3 V</td></tr><tr><td colspan="2">Digital input voltage to GND</td><td>-0.3 V to 4.0 V</td></tr><tr><td colspan="2">Digital output voltage to GND</td><td>-0.3 V to  $V_{DD}$  + 0.3 V</td></tr><tr><td colspan="2"> $T_A$  Operating free-air temperature range</td><td>-40°C to 85°C</td></tr><tr><td colspan="2"> $T_{STORAGE}$  Storage temperature range</td><td>-65°C to 150°C</td></tr><tr><td colspan="2"> $T_J$  Junction temperature</td><td>150°C</td></tr><tr><td rowspan="2">SOT-23 Package</td><td> $\theta_{JA}$  Thermal impedance</td><td>110.9°C/W</td></tr><tr><td> $\theta_{JC}$  Thermal impedance</td><td>22.31°C/W</td></tr><tr><td rowspan="2">Lead temperature, soldering</td><td>Vapor phase (10–40 sec)</td><td>250°C</td></tr><tr><td>Infrared (10–30 sec)</td><td>260°C</td></tr><tr><td colspan="2">ESD</td><td>3 kV</td></tr></table>

## SPECI FICATIONS<sub>,</sub> ADS7866

$\mathsf { A t } - 4 0 ^ { \circ } \mathsf C$ to 85<sup>°</sup>C <sub>,</sub> $\mathsf { f } _ { \mathsf { S A M P L E } } = 2 0 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4 \mathsf { M H z }$ i f 1 . $\mathrm { \ i \setminus } \le \mathsf { V } _ { \mathsf { D D } } \le 3 . 6 \lor ;$ $\mathsf { f } _ { \mathsf { S A M P L E } } = 1 0 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 1 . 7$ M Hz if $1 . 2 \vee \le \vee _ { \mathsf { D D } } < 1 . 6 \vee$ (u n less othe rwise noted)

<table><tr><td colspan="2">PARAMETER</td><td>TEST CONDITIONS</td><td>MIN</td><td>TYP</td><td>MAX</td><td>UNIT</td></tr><tr><td colspan="7">SYSTEM PERFORMANCE</td></tr><tr><td colspan="2">Resolution</td><td></td><td colspan="3">12</td><td>Bits</td></tr><tr><td colspan="2">No missing codes</td><td></td><td colspan="3">12</td><td>Bits</td></tr><tr><td colspan="2">Integral linearity</td><td></td><td colspan="2">-1.5</td><td>1.5</td><td>LSB(1)</td></tr><tr><td colspan="2">Differential linearity</td><td></td><td colspan="2">-1</td><td>1.5</td><td>LSB</td></tr><tr><td rowspan="2" colspan="2">Offset  $error^{(2)}$ </td><td> $1.2\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2">-2</td><td>2</td><td rowspan="2">LSB</td></tr><tr><td> $1.6\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">-3</td><td>3</td></tr><tr><td rowspan="2" colspan="2">Gain  $error^{(3)}$ </td><td> $1.2\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2">-2</td><td>2</td><td rowspan="2">LSB</td></tr><tr><td> $1.6\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">-2</td><td>2</td></tr><tr><td rowspan="2" colspan="2">Total unadjusted  $error^{(4)}$ </td><td> $1.2\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2">-2.5</td><td>2.5</td><td rowspan="2">LSB</td></tr><tr><td> $1.6\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">-3.5</td><td>3.5</td></tr><tr><td colspan="7">SAMPLING DYNAMICS (See Timing Characteristics Section)</td></tr><tr><td> $t_{CONVERT}$ </td><td>Conversion time</td><td> $f_{SCLK} = {3.4}\mathrm{{MHz}},{13}\mathrm{{SCLK}}$  cycles</td><td colspan="3">3.82</td><td>μs</td></tr><tr><td> $t_{SAMPLE}$ </td><td>Acquisition time</td><td> $f_{SCLK} = {3.4}\mathrm{{MHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">0.64</td><td>μs</td></tr><tr><td> $f_{SAMPLE}$ </td><td>Throughput rate</td><td> $f_{SCLK} = {3.4}\mathrm{{MHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2"></td><td>200</td><td>KSPS</td></tr><tr><td></td><td>Aperture delay</td><td></td><td colspan="3">10</td><td>ns</td></tr><tr><td></td><td>Aperture jitter</td><td></td><td colspan="3">40</td><td>ps</td></tr><tr><td colspan="7">DYNAMIC CHARACTERISTICS</td></tr><tr><td rowspan="2">SINAD</td><td rowspan="2">Signal-to-noise and distortion</td><td> $f_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">68</td><td rowspan="2">dB</td></tr><tr><td> $f_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td>69</td><td colspan="2">70</td></tr><tr><td rowspan="2">SNR</td><td rowspan="2">Signal-to-noise ratio</td><td> $f_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">70</td><td rowspan="2">dB</td></tr><tr><td> $f_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td>70</td><td colspan="2">71</td></tr><tr><td rowspan="2">THD</td><td rowspan="2">Total harmonic  $distortion^{(5)}$ </td><td> $f_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">-70</td><td rowspan="2">dB</td></tr><tr><td> $f_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">-83</td></tr><tr><td rowspan="2">SFDR</td><td rowspan="2">Spurious free dynamic range</td><td> $f_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">75</td><td rowspan="2">dB</td></tr><tr><td> $f_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">85</td></tr><tr><td rowspan="4"></td><td rowspan="4">Full-power  $bandwidth^{(6)}$ </td><td>At 0.1 dB,  ${1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">2</td><td rowspan="4">MHz</td></tr><tr><td>At 0.1 dB,  ${1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">4</td></tr><tr><td>At 3 dB,  ${1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">3</td></tr><tr><td>At 3 dB,  ${1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">8</td></tr><tr><td colspan="7">ANALOG INPUT</td></tr><tr><td></td><td>Full-scale input  $span^{(7)}$ </td><td>VIN - GND</td><td colspan="2">0</td><td> $V_{DD}$ </td><td>V</td></tr><tr><td> $C_S$ </td><td>Input capacitance</td><td></td><td colspan="3">12</td><td>pF</td></tr><tr><td></td><td>Input leakage current</td><td></td><td colspan="2">-1</td><td>1</td><td>μA</td></tr><tr><td colspan="7">DIGITAL INPUT</td></tr><tr><td></td><td>Logic family , CMOS</td><td></td><td colspan="3"></td><td></td></tr><tr><td rowspan="4"> $V_{IH}$ </td><td rowspan="4">Input logic high level</td><td> $1.2\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2"> $0.7 \times {V}_{DD}$ </td><td>3.6</td><td rowspan="4">V</td></tr><tr><td> $1.6\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.8}\mathrm{\;V}$ </td><td colspan="2"> $0.7 \times {V}_{DD}$ </td><td>3.6</td></tr><tr><td> $1.8\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {2.5}\mathrm{\;V}$ </td><td colspan="2"> $0.7 \times {V}_{DD}$ </td><td>3.6</td></tr><tr><td> $2.5\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">2</td><td>3.6</td></tr></table>

( 1 ) L S B = Le ast S i g n i f i ca n t B I t  
(2) The d iffe rence i n the fi rst code transition 000 . . . 000 to 000 . . . 00 1 from the ideal val u e of G N D + 1 LS B .  
( 3 ) T h e d i ffe re n ce i n t h e l ast co d e t ra n s i t i o n 0 1 1 . . . 1 1 1 to 1 1 1 . . . 1 1 1 f ro m t h e i d e a l va l u e of $\mathsf { V } _ { \mathsf { D } \mathsf { D } } - 1$ LS B with the offset e rror removed  
(4) The absol ute d iffe rence from the ideal transfe r fu nction of the conve rte r. Th is specifi cation is si m i lar to I N L e rro r except the effects of offset e rro r and <sub>g</sub>ai n e rro r are i ncl uded .  
(5) The 2 nd th roug h 1 0th harmon ics are used to dete rm i ne TH D .  
(6) I n p ut freq u ency whe re the am pl itude of the d i g itized si g nal has decreased by 0 . 1 d B o r 3 d B .  
(7) I deal i n p ut span wh i ch does not i ncl ude gai n o r offset e rro rs .

## SPECI FICATIONS<sub>,</sub> ADS7866 (conti n ued)

At –40<sup>°</sup>C to 85<sup>°</sup>C $t _ { \mathsf { S A M P L E } } = 2 0 0$ KSPS and $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4$ M Hz if 1 6 $\mathsf { V } \leq \mathsf { V } _ { \mathsf { D D } } \leq 3 . 6 \mathsf { V } ;$ $\mathsf { f } _ { \mathsf { S A M P L E } } = 1 0 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 1 . 7$ M Hz if 1 . 2 $\mathsf { V } \leq \mathsf { V } _ { \mathsf { D D } } < 1 . 6 \mathsf { V }$ (u n l ess othe rwise noted)

<table><tr><td colspan="2">PARAMETER</td><td colspan="2">TEST CONDITIONS</td><td>MIN</td><td>TYP</td><td>MAX</td><td>UNIT</td></tr><tr><td rowspan="4"> $V_{IL}$ </td><td rowspan="4">Input logic low level</td><td colspan="2">1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td>-0.2</td><td></td><td>0.2× $V_{DD}$ </td><td rowspan="4">V</td></tr><tr><td colspan="2">1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td>-0.2</td><td></td><td>0.2× $V_{DD}$ </td></tr><tr><td colspan="2">1.8 V ≤  $V_{DD}$ &lt; 2.5 V</td><td>-0.2</td><td></td><td>0.3× $V_{DD}$ </td></tr><tr><td colspan="2">2.5 V ≤  $V_{DD}$ ≤ 3.6 V</td><td>-0.2</td><td></td><td>0.8</td></tr><tr><td> $I_{SCLK}$ </td><td>SCLK pin leakage current</td><td colspan="2">Digital input = 0 V or  $V_{DD}$ </td><td>-1</td><td>0.02</td><td>1</td><td>μA</td></tr><tr><td> $I_{CS}$ </td><td> $\overline{CS}$ pin leakage current</td><td colspan="2"></td><td></td><td>±1</td><td></td><td>μA</td></tr><tr><td> $C_{IN}$ </td><td>Digital input pin capacitance</td><td colspan="2"></td><td></td><td></td><td>10</td><td>pF</td></tr><tr><td colspan="8">DIGITAL OUTPUT</td></tr><tr><td> $V_{OH}$ </td><td>Output logic high level</td><td colspan="2"> $I_{SOURCE}$ = 200 μA</td><td> $V_{DD}$ -0.2</td><td></td><td> $V_{DD}$ </td><td>V</td></tr><tr><td> $V_{OL}$ </td><td>Output logic low level</td><td colspan="2"> $I_{SINK}$ = 200 μA</td><td>0</td><td></td><td>0.2</td><td>V</td></tr><tr><td> $I_{SDO}$ </td><td>SDO pin leakage current</td><td colspan="2">Floating output</td><td>-1</td><td></td><td>1</td><td>μA</td></tr><tr><td> $C_{OUT}$ </td><td>Digital output pin capacitance</td><td colspan="2">Floating output</td><td></td><td></td><td>10</td><td>pF</td></tr><tr><td></td><td>Data format, straight binary</td><td colspan="2"></td><td></td><td></td><td></td><td></td></tr><tr><td colspan="8">POWER SUPPLY REQUIREMENTS</td></tr><tr><td> $V_{DD}$ </td><td>Supply voltage</td><td colspan="2"></td><td>1.2</td><td></td><td>3.6</td><td>V</td></tr><tr><td rowspan="23"> $I_{DD}$ </td><td rowspan="23">Supply current, normal operation</td><td rowspan="23">Digital inputs = 0 V or  $V_{DD}$ </td><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>385</td><td>500</td><td rowspan="4">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>193</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>97</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 20 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>39</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3 V</td><td></td><td>340</td><td></td><td rowspan="4">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3 V</td><td></td><td>170</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3 V</td><td></td><td>85</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 20 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3 V</td><td></td><td>35</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 2.5 V</td><td></td><td>305</td><td></td><td rowspan="4">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 2.5 V</td><td></td><td>153</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 2.5 V</td><td></td><td>77</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 20 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 2.5 V</td><td></td><td>31</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.8 V</td><td></td><td>256</td><td></td><td rowspan="4">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.8 V</td><td></td><td>128</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.8 V</td><td></td><td>65</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 20 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.8 V</td><td></td><td>26</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>241</td><td>330</td><td rowspan="4">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>121</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>61</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 20 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>25</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>186</td><td>250</td><td rowspan="3">μA</td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>93</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 20 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>37</td><td></td></tr><tr><td> $I_{DD}$ </td><td>Power-down mode</td><td colspan="2">SCLK on or off</td><td></td><td>0.008</td><td>0.3</td><td>μA</td></tr><tr><td colspan="8">POWER DISSIPATION</td></tr><tr><td rowspan="3" colspan="2">Normal operation</td><td colspan="2"> $f_{SAMPLE}$ = 200 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>1.39</td><td>1.80</td><td rowspan="3">mW</td></tr><tr><td colspan="2"> $f_{SAMPLE}$ = 200 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>0.39</td><td>0.53</td></tr><tr><td colspan="2"> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>0.22</td><td>0.3</td></tr><tr><td colspan="2">Power-down mode</td><td colspan="2">SCLK on or off,  $V_{DD}$ = 3.6 V</td><td></td><td>1.08</td><td></td><td>μW</td></tr><tr><td colspan="8">TEMPERATURE RANGE</td></tr><tr><td colspan="2">Specified performance</td><td colspan="2"></td><td>-40</td><td></td><td>85</td><td>°C</td></tr></table>

## SPECI FICATIONS<sub>,</sub> ADS7867

$\mathsf { A t } - 4 0 ^ { \circ } \mathsf C$ to 85<sup>°</sup>C <sub>,</sub> $\mathsf { f } _ { \mathsf { S A M P L E } } = 2 4 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4$ M H z if 1 $6 \mathsf { V } \leq \mathsf { V } _ { \mathsf { D D } } \leq 3 . 6 \mathsf { V } ;$ $\mathsf { f } _ { \mathsf { S A M P L E } } = 1 2 0$ KSPS and $\mathsf { f } _ { \mathsf { S C L K } } = 1 . 7$ M Hz if $1 . 2 \vee \le \vee _ { \mathsf { D D } } < 1 . 6 \vee$ (u n less othe rwise noted)

<table><tr><td colspan="2">PARAMETER</td><td>TEST CONDITIONS</td><td>MIN</td><td>TYP</td><td>MAX</td><td>UNIT</td></tr><tr><td colspan="7">SYSTEM PERFORMANCE</td></tr><tr><td></td><td>Resolution</td><td></td><td colspan="3">10</td><td>Bits</td></tr><tr><td></td><td>No missing codes</td><td></td><td colspan="3">10</td><td>Bits</td></tr><tr><td></td><td>Integral linearity</td><td></td><td colspan="2">-0.5</td><td>0.5</td><td>LSB(1)</td></tr><tr><td></td><td>Differential linearity</td><td></td><td colspan="2">-0.5</td><td>0.5</td><td>LSB</td></tr><tr><td rowspan="2"></td><td rowspan="2">Offset  $error^{(2)}$ </td><td> $1.2\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2">-0.75</td><td>0.75</td><td rowspan="2">LSB</td></tr><tr><td> $1.6\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">-1</td><td>1</td></tr><tr><td rowspan="2"></td><td rowspan="2">Gain  $error^{(3)}$ </td><td> $1.2\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2">-0.5</td><td>0.5</td><td rowspan="2">LSB</td></tr><tr><td> $1.6\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">-0.5</td><td>0.5</td></tr><tr><td rowspan="2"></td><td rowspan="2">Total unadjusted  $error^{(4)}$ </td><td> $1.2\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2">-2</td><td>2</td><td rowspan="2">LSB</td></tr><tr><td> $1.6\mathrm{V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">-2</td><td>2</td></tr><tr><td colspan="7">SAMPLING DYNAMICS (See Timing Characteristics Section)</td></tr><tr><td> $t_{CONVERT}$ </td><td>Conversion time</td><td> $f_{SCLK} = {3.4}\mathrm{{MHz}},{11}\mathrm{{SCLK}}$  cycles</td><td colspan="3">3.235</td><td>μs</td></tr><tr><td> $t_{SAMPLE}$ </td><td>Acquisition time</td><td> $f_{SCLK} = {3.4}\mathrm{{MHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">0.64</td><td>μs</td></tr><tr><td> $f_{SAMPLE}$ </td><td>Throughput rate</td><td> $f_{SCLK} = {3.4}\mathrm{{MHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">240</td><td>KSPS</td></tr><tr><td></td><td>Aperture delay</td><td></td><td colspan="3">10</td><td>ns</td></tr><tr><td></td><td>Aperture jitter</td><td></td><td colspan="3">40</td><td>ps</td></tr><tr><td colspan="7">DYNAMIC CHARACTERISTICS</td></tr><tr><td rowspan="2">SINAD</td><td rowspan="2">Signal-to-noise and distortion</td><td> $f_{SAMPLE} = {100}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">61</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE} = {200}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td>61</td><td colspan="2">61.7</td></tr><tr><td rowspan="2">SNR</td><td rowspan="2">Signal-to-noise ratio</td><td> $f_{SAMPLE} = {100}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">61.5</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE} = {200}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">61.8</td></tr><tr><td rowspan="2">THD</td><td rowspan="2">Total harmonic  $distortion^{(5)}$ </td><td> $f_{SAMPLE} = {100}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">-68</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE} = {200}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">-78</td><td>-72</td></tr><tr><td rowspan="2">SFDR</td><td rowspan="2">Spurious free dynamic range</td><td> $f_{SAMPLE} = {100}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">73</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE} = {200}\mathrm{{KSPS}},{f}_{IN} = {30}\mathrm{{kHz}},{1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td>74</td><td colspan="2">80</td></tr><tr><td rowspan="4"></td><td rowspan="4">Full-power  $bandwidth^{(6)}$ </td><td>At 0.1 dB,  ${1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">2</td><td rowspan="4">MHz</td></tr><tr><td>At 0.1 dB,  ${1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">4</td></tr><tr><td>At 3 dB,  ${1.2}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="3">3</td></tr><tr><td>At 3 dB,  ${1.6}\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="3">8</td></tr><tr><td colspan="7">ANALOG INPUT</td></tr><tr><td></td><td>Full-scale input  $span^{(7)}$ </td><td>VIN - GND</td><td colspan="2">0</td><td> $V_{DD}$ </td><td>V</td></tr><tr><td> $C_S$ </td><td>Input capacitance</td><td></td><td colspan="3">12</td><td>pF</td></tr><tr><td></td><td>Input leakage current</td><td></td><td colspan="2">-1</td><td>1</td><td>μA</td></tr><tr><td colspan="7">DIGITAL INPUT</td></tr><tr><td></td><td>Logic family, CMOS</td><td></td><td colspan="3"></td><td></td></tr><tr><td rowspan="4"> $V_{IH}$ </td><td rowspan="4">Input logic high level</td><td> $1.2\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.6}\mathrm{\;V}$ </td><td colspan="2"> $0.7 \times {V}_{DD}$ </td><td>3.6</td><td rowspan="4">V</td></tr><tr><td> $1.6\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {1.8}\mathrm{\;V}$ </td><td colspan="2"> $0.7 \times {V}_{DD}$ </td><td>3.6</td></tr><tr><td> $1.8\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} < {2.5}\mathrm{\;V}$ </td><td colspan="2"> $0.7 \times {V}_{DD}$ </td><td>3.6</td></tr><tr><td> $2.5\mathrm{\;V} \leq {\mathrm{V}}_{\mathrm{{DD}}} \leq {3.6}\mathrm{\;V}$ </td><td colspan="2">2</td><td>3.6</td></tr></table>

( 1 ) L S B = Le ast S i g n i f i ca n t B I t  
(2) The d iffe rence i n the fi rst code transition 000 . . . 000 to 000 . . . 00 1 from the ideal val u e of G N D + 1 LS B .  
( 3 ) T h e d i ffe re n ce i n t h e l ast co d e t ra n s i t i o n 0 1 1 . . . 1 1 1 to 1 1 1 . . . 1 1 1 f ro m t h e i d e a l va l u e of $\mathsf { V } _ { \mathsf { D } \mathsf { D } } - 1$ LS B with the offset e rror removed  
(4) The absol ute d iffe rence from the ideal transfe r fu nction of the conve rte r. Th is specifi cation is si m i lar to I N L e rro r except the effects of offset e rro r and <sub>g</sub>ai n e rro r are i ncl uded .  
(5) The 2 nd th roug h 1 0th harmon ics are used to dete rm i ne TH D .  
(6) I n p ut freq u ency whe re the am pl itude of the d i g itized si g nal has decreased by 0 . 1 d B o r 3 d B .  
(7) I deal i n p ut span wh i ch does not i ncl ude gai n o r offset e rro rs .

## SPECI FICATIONS<sub>,</sub> ADS7867 (conti n ued)

At –40<sup>°</sup>C to 85<sup>°</sup>C $\mathsf { f } _ { \mathsf { S A M P L E } } = 2 4 0$ KSPS and $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4$ M Hz if 1 6 $\mathsf { V } \leq \mathsf { V } _ { \mathsf { D D } } \leq 3 . 6 \mathsf { V } ;$ $\mathsf { f } _ { \mathsf { S A M P L E } } = 1 2 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 1 . 7$ M Hz if 1 . 2 $\mathsf { V } \leq \mathsf { V } _ { \mathsf { D D } } < 1 . 6 \mathsf { V }$ (u n less othe rwise noted)

<table><tr><td colspan="2">PARAMETER</td><td colspan="2">TEST CONDITIONS</td><td>MIN</td><td>TYP</td><td>MAX</td><td>UNIT</td></tr><tr><td rowspan="4"> $V_{IL}$ </td><td rowspan="4">Input logic low level</td><td colspan="2">1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td>-0.2</td><td></td><td>0.2× $V_{DD}$ </td><td rowspan="4">V</td></tr><tr><td colspan="2">1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td>-0.2</td><td></td><td>0.2× $V_{DD}$ </td></tr><tr><td colspan="2">1.8 V ≤  $V_{DD}$ &lt; 2.5 V</td><td>-0.2</td><td></td><td>0.3× $V_{DD}$ </td></tr><tr><td colspan="2">2.5 V ≤  $V_{DD}$ ≤ 3.6 V</td><td>-0.2</td><td></td><td>0.8</td></tr><tr><td> $I_{SCLK}$ </td><td>SCLK pin leakage current</td><td colspan="2">Digital input = 0 V or  $V_{DD}$ </td><td>-1</td><td>0.02</td><td>1</td><td>μA</td></tr><tr><td> $I_{CS}$ </td><td> $\overline{CS}$ pin leakage current</td><td colspan="2"></td><td></td><td>±1</td><td></td><td>μA</td></tr><tr><td> $C_{IN}$ </td><td>Digital input pin capacitance</td><td colspan="2"></td><td></td><td></td><td>10</td><td>pF</td></tr><tr><td colspan="8">DIGITAL OUTPUT</td></tr><tr><td> $V_{OH}$ </td><td>Output logic high level</td><td colspan="2"> $I_{SOURCE}$ = 200 μA</td><td> $V_{DD}$ -0.2</td><td></td><td> $V_{DD}$ </td><td>V</td></tr><tr><td> $V_{OL}$ </td><td>Output logic low level</td><td colspan="2"> $I_{SINK}$ = 200 μA</td><td>0</td><td></td><td>0.2</td><td>V</td></tr><tr><td> $I_{SDO}$ </td><td>SDO pin leakage current</td><td colspan="2">Floating output</td><td>-1</td><td></td><td>1</td><td>μA</td></tr><tr><td> $C_{OUT}$ </td><td>Digital output pin capacitance</td><td colspan="2">Floating output</td><td></td><td></td><td>10</td><td>pF</td></tr><tr><td></td><td>Data format, straight binary</td><td colspan="2"></td><td></td><td></td><td></td><td></td></tr><tr><td colspan="8">POWER SUPPLY REQUIREMENTS</td></tr><tr><td> $V_{DD}$ </td><td>Supply voltage</td><td></td><td></td><td>1.2</td><td></td><td>3.6</td><td>V</td></tr><tr><td rowspan="6"> $I_{DD}$ </td><td rowspan="6">Supply current, normal operation</td><td rowspan="6">Digital Inputs = 0 V or  $V_{DD}$ </td><td> $f_{SAMPLE}$ = 240 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>420</td><td>500</td><td rowspan="2">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>172</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 240 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>261</td><td>330</td><td rowspan="2">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>107</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 120 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>202</td><td>250</td><td rowspan="2">μA</td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>83</td><td></td></tr><tr><td> $I_{DD}$ </td><td>Power-down mode</td><td colspan="2">SCLK on or off</td><td></td><td>0.008</td><td>0.3</td><td>μA</td></tr><tr><td colspan="8">POWER DISSIPATION</td></tr><tr><td rowspan="3"></td><td rowspan="3">Normal operation</td><td colspan="2"> $f_{SAMPLE}$ = 240 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>1.51</td><td>1.80</td><td rowspan="3">mW</td></tr><tr><td colspan="2"> $f_{SAMPLE}$ = 240 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>0.42</td><td>0.53</td></tr><tr><td colspan="2"> $f_{SAMPLE}$ = 120 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>0.24</td><td>0.30</td></tr><tr><td></td><td>Power-down mode</td><td colspan="2">SCLK on or off,  $V_{DD}$ = 3.6 V</td><td></td><td></td><td>1.08</td><td>μW</td></tr><tr><td colspan="8">TEMPERATURE RANGE</td></tr><tr><td></td><td>Specified performance</td><td colspan="2"></td><td>-40</td><td></td><td>85</td><td>°C</td></tr></table>

## SPECI FICATIONS<sub>,</sub> ADS7868

$\mathsf { A t } - 4 0 ^ { \circ } \mathsf C$ to $8 5 ^ { \circ } \mathsf { C } , \mathsf { f } _ { \mathsf { S A M P L E } } = 2 8 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4 \mathsf { M H z }$ i f 1 . $\mathfrak { I } \vee \le \vee _ { \mathsf { D D } } \le 3 . 6 \vee ; \mathfrak { f } _ { \mathsf { S A M P L E } } = 1 4 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 1 . 7$ M Hz if $1 . 2 \vee \le \vee _ { \mathsf { D D } } < 1 . 6 \vee$ (u n less othe rwise noted)

<table><tr><td colspan="2">PARAMETER</td><td>TEST CONDITIONS</td><td>MIN</td><td>TYP</td><td>MAX</td><td>UNIT</td></tr><tr><td colspan="7">SYSTEM PERFORMANCE</td></tr><tr><td colspan="2">Resolution</td><td></td><td colspan="3">8</td><td>Bits</td></tr><tr><td colspan="2">No missing codes</td><td></td><td colspan="3">8</td><td>Bits</td></tr><tr><td colspan="2">Integral linearity</td><td></td><td colspan="2">-0.5</td><td>0.5</td><td> $LSB^{(1)}$ </td></tr><tr><td colspan="2">Differential linearity</td><td></td><td colspan="2">-0.5</td><td>0.5</td><td>LSB</td></tr><tr><td rowspan="2" colspan="2"> $Offset\ error^{(2)}$ </td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2">-0.5</td><td>0.5</td><td rowspan="2">LSB</td></tr><tr><td>1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2">-0.5</td><td>0.5</td></tr><tr><td rowspan="2" colspan="2"> $Gain\ error^{(3)}$ </td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2">-0.5</td><td>0.5</td><td rowspan="2">LSB</td></tr><tr><td>1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2">-0.5</td><td>0.5</td></tr><tr><td rowspan="2" colspan="2">Total unadjusted  $error^{(4)}$ </td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2">-1</td><td>1</td><td rowspan="2">LSB</td></tr><tr><td>1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2">-1</td><td>1</td></tr><tr><td colspan="7">SAMPLING DYNAMICS (See Timing Characteristics Section)</td></tr><tr><td> $t_{CONVERT}$ </td><td>Conversion time</td><td> $f_{SCLK}$ = 3.4 MHz, 9 SCLK cycles</td><td colspan="3">2.647</td><td>μs</td></tr><tr><td> $t_{SAMPLE}$ </td><td>Acquisition time</td><td> $f_{SCLK}$ = 3.4 MHz, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="3">0.64</td><td>μs</td></tr><tr><td> $f_{SAMPLE}$ </td><td>Throughput rate</td><td> $f_{SCLK}$ = 3.4 MHz, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2"></td><td>280</td><td>KSPS</td></tr><tr><td></td><td>Aperture delay</td><td></td><td></td><td colspan="2">10</td><td>ns</td></tr><tr><td></td><td>Aperture jitter</td><td></td><td></td><td colspan="2">40</td><td>ps</td></tr><tr><td colspan="7">DYNAMIC CHARACTERISTICS</td></tr><tr><td rowspan="2">SINAD</td><td rowspan="2">Signal-to-noise and distortion</td><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{IN}$ = 30 kHz, 1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td></td><td colspan="2">49</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{IN}$ = 30 kHz, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td>49</td><td colspan="2">49.4</td></tr><tr><td rowspan="2">SNR</td><td rowspan="2">Signal-to-noise ratio</td><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{IN}$ = 30 kHz, 1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td></td><td colspan="2">49.4</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{IN}$ = 30 kHz, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td></td><td colspan="2">49.8</td></tr><tr><td rowspan="2">THD</td><td rowspan="2">Total harmonic distortion(5)</td><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{IN}$ = 30 kHz, 1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td></td><td colspan="2">-65</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{IN}$ = 30 kHz, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td></td><td>-72</td><td>-66</td></tr><tr><td rowspan="2">SFDR</td><td rowspan="2">Spurious free dynamic range</td><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{IN}$ = 30 kHz, 1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td></td><td colspan="2">67</td><td rowspan="2">dB</td></tr><tr><td> $f_{SAMPLE}$ = 200 KSPS,  $f_{IN}$ = 30 kHz, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td>66</td><td colspan="2">67</td></tr><tr><td rowspan="4"></td><td rowspan="4">Full-power bandwidth(6)</td><td>At 0.1 dB, 1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td></td><td colspan="2">2</td><td rowspan="4">MHz</td></tr><tr><td>At 0.1 dB, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td></td><td colspan="2">4</td></tr><tr><td>At 3 dB, 1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td></td><td colspan="2">3</td></tr><tr><td>At 3 dB, 1.6 V ≤  $V_{DD}$ ≤ 3.6 V</td><td></td><td colspan="2">8</td></tr><tr><td colspan="7">ANALOG INPUT</td></tr><tr><td></td><td>Full-scale input span(7)</td><td>VIN - GND</td><td colspan="2">0</td><td> $V_{DD}$ </td><td>V</td></tr><tr><td> $C_S$ </td><td>Input capacitance</td><td></td><td></td><td colspan="2">12</td><td>pF</td></tr><tr><td></td><td>Input leakage current</td><td></td><td colspan="2">-1</td><td>1</td><td>μA</td></tr><tr><td colspan="7">DIGITAL INPUT</td></tr><tr><td></td><td>Logic family, CMOS</td><td></td><td colspan="3"></td><td></td></tr><tr><td rowspan="4"> $V_{IH}$ </td><td rowspan="4">Input logic high level</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2">0.7× $V_{DD}$ </td><td>3.6</td><td rowspan="4">V</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="2">0.7× $V_{DD}$ </td><td>3.6</td></tr><tr><td>1.8 V ≤  $V_{DD}$ &lt; 2.5 V</td><td colspan="2">0.7× $V_{DD}$ </td><td>3.6</td></tr><tr><td>2.5 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2">2</td><td>3.6</td></tr></table>

( 1 ) L S B = Le ast S i g n i f i ca n t B I t  
(2) The d iffe rence i n the fi rst code transition 000 . . . 000 to 000 . . . 00 1 from the ideal val u e of G N D + 1 LS B .  
( 3 ) T h e d i ffe re n ce i n t h e l ast co d e t ra n s i t i o n 0 1 1 . . . 1 1 1 to 1 1 1 . . . 1 1 1 f ro m t h e i d e a l va l u e of $\mathsf { V } _ { \mathsf { D } \mathsf { D } } - 1$ LS B with the offset e rror removed  
(4) The absol ute d iffe rence from the ideal transfe r fu nction of the conve rte r. Th is specifi cation is si m i lar to I N L e rro r except the effects of offset e rro r and <sub>g</sub>ai n e rro r are i ncl uded .  
(5) The 2 nd th roug h 1 0th harmon ics are used to dete rm i ne TH D .  
(6) I n p ut freq u ency whe re the am pl itude of the d i g itized si g nal has decreased by 0 . 1 d B o r 3 d B .  
(7) I deal i n p ut span wh i ch does not i ncl ude gai n o r offset e rro rs .

## SPECI FICATIONS<sub>,</sub> ADS7868 (conti n ued)

At –40<sup>°</sup>C to 85<sup>°</sup>C $\mathsf { f } _ { \mathsf { S A M P L E } } = 2 8 0$ KSPS and $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4 \mathsf { M H z }$ i f 1 . 6 $\mathsf { V } \leq \mathsf { V } _ { \mathsf { D D } } \leq 3 . 6 \mathsf { V } ;$ $\mathsf { f } _ { \mathsf { S A M P L E } } = 1 4 0 \mathsf { K S P S }$ and $\mathsf { f } _ { \mathsf { S C L K } } = 1 . 7$ M Hz if $1 . 2 \vee \le \vee _ { \mathsf { D D } } < 1 . 6 \vee$ (u n less othe rwise noted)

<table><tr><td colspan="2">PARAMETER</td><td colspan="2">TEST CONDITIONS</td><td>MIN</td><td>TYP</td><td>MAX</td><td>UNIT</td></tr><tr><td rowspan="4"> $V_{IL}$ </td><td rowspan="4">Input logic low level</td><td colspan="2">1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td>-0.2</td><td></td><td>0.2× $V_{DD}$ </td><td rowspan="4">V</td></tr><tr><td colspan="2">1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td>-0.2</td><td></td><td>0.2× $V_{DD}$ </td></tr><tr><td colspan="2">1.8 V ≤  $V_{DD}$ &lt; 2.5 V</td><td>-0.2</td><td></td><td>0.3× $V_{DD}$ </td></tr><tr><td colspan="2">2.5 V ≤  $V_{DD}$ ≤ 3.6 V</td><td>-0.2</td><td></td><td>0.8</td></tr><tr><td> $I_{SCLK}$ </td><td>SCLK pin leakage current</td><td colspan="2">Digital input = 0 V or  $V_{DD}$ </td><td>-1</td><td>0.02</td><td>1</td><td>μA</td></tr><tr><td> $I_{CS}$ </td><td> $\overline{CS}$ pin leakage current</td><td colspan="2"></td><td></td><td>±1</td><td></td><td>μA</td></tr><tr><td> $C_{IN}$ </td><td>Digital input pin capacitance</td><td colspan="2"></td><td></td><td></td><td>10</td><td>pF</td></tr><tr><td colspan="8">DIGITAL OUTPUT</td></tr><tr><td> $V_{OH}$ </td><td>Output logic high level</td><td colspan="2"> $I_{SOURCE}$ = 200 μA</td><td> $V_{DD}$ -0.2</td><td></td><td> $V_{DD}$ </td><td>V</td></tr><tr><td> $V_{OL}$ </td><td>Output logic low level</td><td colspan="2"> $I_{SINK}$ = 200 μA</td><td>0</td><td></td><td>0.2</td><td>V</td></tr><tr><td> $I_{SDO}$ </td><td>SDO pin leakage current</td><td colspan="2">Floating output</td><td>-1</td><td></td><td>1</td><td>μA</td></tr><tr><td> $C_{OUT}$ </td><td>Digital output pin capacitance</td><td colspan="2">Floating output</td><td></td><td></td><td>10</td><td>pF</td></tr><tr><td></td><td>Data format, straight binary</td><td colspan="2"></td><td></td><td></td><td></td><td></td></tr><tr><td colspan="8">POWER SUPPLY REQUIREMENTS</td></tr><tr><td> $V_{DD}$ </td><td>Supply voltage</td><td></td><td></td><td>1.2</td><td></td><td>3.6</td><td>V</td></tr><tr><td rowspan="6"> $I_{DD}$ </td><td rowspan="6">Supply current, normal operation</td><td rowspan="6">Digital Inputs = 0 V or  $V_{DD}$ </td><td> $f_{SAMPLE}$ = 280 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>439</td><td>500</td><td rowspan="2">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>154</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 280 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>264</td><td>330</td><td rowspan="2">μA</td></tr><tr><td> $f_{SAMPLE}$ = 100 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>93</td><td></td></tr><tr><td> $f_{SAMPLE}$ = 140 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>201</td><td>250</td><td rowspan="2">μA</td></tr><tr><td> $f_{SAMPLE}$ = 50 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>70</td><td></td></tr><tr><td> $I_{DD}$ </td><td>Power-down mode</td><td colspan="2">SCLK on or off</td><td></td><td>0.008</td><td>0.3</td><td>μA</td></tr><tr><td colspan="2">POWER DISSIPATION</td><td colspan="2"></td><td></td><td></td><td></td><td></td></tr><tr><td rowspan="3"></td><td rowspan="3">Normal operation</td><td colspan="2"> $f_{SAMPLE}$ = 280 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 3.6 V</td><td></td><td>1.58</td><td>1.8</td><td rowspan="3">mW</td></tr><tr><td colspan="2"> $f_{SAMPLE}$ = 280 KSPS,  $f_{SCLK}$ = 3.4 MHz,  $V_{DD}$ = 1.6 V</td><td></td><td>0.42</td><td>0.53</td></tr><tr><td colspan="2"> $f_{SAMPLE}$ = 140 KSPS,  $f_{SCLK}$ = 1.7 MHz,  $V_{DD}$ = 1.2 V</td><td></td><td>0.24</td><td>0.3</td></tr><tr><td></td><td>Power-down mode</td><td colspan="2">SCLK on or off,  $V_{DD}$ = 3.6 V</td><td></td><td></td><td>1.08</td><td>μW</td></tr><tr><td colspan="8">TEMPERATURE RANGE</td></tr><tr><td colspan="2">Specified performance</td><td colspan="2"></td><td>-40</td><td></td><td>85</td><td>°C</td></tr></table>

## TIMING REQUIREMENTS<sup>( )( )</sup>

$\mathsf { A t } - 4 0 ^ { \circ } \mathsf C$ to 85<sup>°</sup>C $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4 \mathsf { M H z }$ i f 1 . 6 $\mathsf { V } \leq \mathsf { V } _ { \mathsf { D D } } \leq 3 . 6 \mathsf { V } ; \mathsf { f } _ { \mathsf { S C L K } } = 1 . 7$ M Hz if $1 . 2 \mathrm { V } \leq \mathrm { V } _ { \mathsf { D D } } < 1 . 6 \mathrm { V } ,$ 50-<sub>p</sub> F Load on S DO Pi n u n less othe rwise noted

<table><tr><td colspan="2">PARAMETER</td><td>TEST CONDITIONS</td><td>MIN</td><td>TYP</td><td>MAX</td><td>UNIT</td></tr><tr><td> $t_{sample}$ </td><td>Sample time</td><td></td><td colspan="3"> $t_{SU(CSF-FSCLKF)} + 2 \times t_{C(SCLK)}$ </td><td>μs</td></tr><tr><td rowspan="3"> $t_{convert}$ </td><td rowspan="3">Conversion time</td><td>ADS7866</td><td colspan="3">13 ×  $t_{C(SCLK)}$ </td><td rowspan="3">μs</td></tr><tr><td>ADS7867</td><td colspan="3">11 ×  $t_{C(SCLK)}$ </td></tr><tr><td>ADS7868</td><td colspan="3">9 ×  $t_{C(SCLK)}$ </td></tr><tr><td rowspan="4"> $t_{C(SCLK)}$ </td><td rowspan="4">Cycle time</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2">See (3)</td><td>100</td><td rowspan="4">μs</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="2">See (3)</td><td>100</td></tr><tr><td>1.8 V ≤  $V_{DD}$ &lt; 2.5 V</td><td colspan="2">See (3)</td><td>50</td></tr><tr><td>2.5 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2">See (3)</td><td>6.7</td></tr><tr><td> $t_{WH(SCLK)}$ </td><td>Pulse duration</td><td></td><td colspan="2">0.4 ×  $t_{C(SCLK)}$ </td><td>0.6 ×  $t_{C(SCLK)}$ </td><td>ns</td></tr><tr><td> $t_{WL(SCLK)}$ </td><td>Pulse duration</td><td></td><td colspan="2">0.4 ×  $t_{C(SCLK)}$ </td><td>0.6 ×  $t_{C(SCLK)}$ </td><td>ns</td></tr><tr><td rowspan="3"> $t_{SU(CSF-FSCLKF)}$ </td><td rowspan="3">Setup time</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="3">192</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="3">55</td></tr><tr><td>1.8 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="3">55</td></tr><tr><td rowspan="3"> $t_{D(CSF-SDOVALID)}$ </td><td rowspan="3">Delay time</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2"></td><td>65</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="2"></td><td>55</td></tr><tr><td>1.8 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2"></td><td>55</td></tr><tr><td rowspan="3"> $t_{H(SCLKF-SDOVALID)}$ </td><td rowspan="3">Hold time</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="3">20</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="3">10</td></tr><tr><td>1.8 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="3">10</td></tr><tr><td rowspan="3"> $t_{D(SCLKF-SDOVALID)}$ </td><td rowspan="3">Delay time</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2"></td><td>140</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="2"></td><td>140</td></tr><tr><td>1.8 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2"></td><td>140</td></tr><tr><td rowspan="3"> $t_{DIS(EOC-SDOZ)}$ </td><td rowspan="3">Disable time</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="2">10</td><td>80</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="2">7</td><td>60</td></tr><tr><td>1.8 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="2">7</td><td>60</td></tr><tr><td rowspan="3"> $t_{WH(CS)}$ </td><td rowspan="3">Pulse duration</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="3">20</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="3">10</td></tr><tr><td>1.8 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="3">10</td></tr><tr><td rowspan="3"> $t_{SU(LSBZ-CSF)}$ </td><td rowspan="3">Setup time</td><td>1.2 V ≤  $V_{DD}$ &lt; 1.6 V</td><td colspan="3">20</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤  $V_{DD}$ &lt; 1.8 V</td><td colspan="3">10</td></tr><tr><td>1.8 V ≤  $V_{DD}$ ≤ 3.6 V</td><td colspan="3">10</td></tr></table>

( 1 ) A l l i n p u t s i g n a l s a re s p e c i f i e d w i t h $\mathfrak { t } _ { \mathtt { f } } = \mathfrak { t } _ { \mathtt { f } } = 5$ ns ( 1 0% to 90% of $\mathsf { V } _ { \mathsf { D D } } )$ and ti med from a volta<sub>g</sub>e level of $( \mathsf { V } _ { \mathsf { I L } } + \mathsf { V } _ { \mathsf { I H } } ) / 2 .$  
(2 ) S e e t i m i n g d i a g ra m i n F i g u re 1 .  
( 3 ) M i n $\mathsf { t } _ { \mathsf { C } ( \mathsf { S C L K } ) }$ is dete rm i ned b<sub>y</sub> the M i n $\mathsf { t } _ { \mathsf { S A M P L E } }$ of the s<sub>p</sub>ecific resol ution and su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e . See Ac<sub>q</sub>uisition Time Conversion Time and Total C<sub>y</sub>cle Time section fo r fu rthe r detai ls

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fc744f710eb1478030663061417264f5593d428a861145925ef0a93ee26c990e6.jpg)  
Fi<sub>g</sub> u re 1 <sub>.</sub> Ti m i n<sub>g</sub> Dia<sub>g</sub> ram

## PIN CONFIGU RATION

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F26def050b563f7d10bf851adec2e1e87a743ccc067dbc1769902919760d6f67f.jpg)

TERMINAL FUNCTIONS

<table><tr><td colspan="2">TERMINAL</td><td rowspan="2">DESCRIPTION</td></tr><tr><td>NAME</td><td>NO.</td></tr><tr><td> $REF/V_{DD}$ </td><td>1</td><td>External reference input and power supply</td></tr><tr><td>GND</td><td>2</td><td>Ground for signal and power supply. All analog and digital signals are referred with respect to this pin.</td></tr><tr><td>VIN</td><td>3</td><td>Analog signal input</td></tr><tr><td>SCLK</td><td>4</td><td>Serial clock input. This clock is used for clocking data out, and it is the source of conversion clock.</td></tr><tr><td>SDO</td><td>5</td><td>This is the serial data output of the conversion result. The serial stream comes with MSB first. The MSB is clocked out (changed) on the falling edge one SCLK after the sampling period ends. This results in four leading zeros after  $\overline{CS}$  becomes active. SDO is 3-stated once all the valid bits are clocked out (12 for ADS7866, 10 for ADS7867, and 8 for ADS7868).</td></tr><tr><td> $\overline{CS}$ </td><td>6</td><td>This is an active low input signal. It is used as a chip select to gate the SCLK input, to initiate a conversion, and to frame output data.</td></tr></table>

TYPICAL CHARACTERISTICS ADS7866 FFT (81 92 Poi nts)  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F086e316faa6efd2517fef2dcf63b2386f5ce7eb41afee9652f00e7c6cb087cca.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Ffe254494f8756eeba4430e7f6529bf79b3ebe6b1d3f39814202d14a5acb80673.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F553cbfbb57c5c3b713c3e55d0eb89ea0529e403033d76dc2ef798d269b625127.jpg)  
Fi <sub>g</sub> u re 4<sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Ff4deca6490a2d5f4667fa753eef74c400935ab1b3db70283e30b5f360ca854b2.jpg)  
Fi <sub>g</sub> u re 5 <sub>.</sub>

TOTAL HARMONIC DISTORTION vs INPUT FREQU ENCY  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fcbfff68ab80cb21d2b501471f0d1d3c4c978d77635d4ec1edc54418e71258826.jpg)  
Fi<sub>g</sub> u re 6<sub>.</sub>

## TYPICAL CHARACTERISTICS ADS7866 (continued)

SPU RIOUS FREE DYNAMIC RANGE vs INPUT FREQU ENCY  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F23a511d4f0cc50abc49e3a69d9e1461c434d8540d563aeba7438f58de4c0a4c1.jpg)  
Fi <sub>g</sub> u re 7<sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fca1ddc6adf3ec0a88b5e4b7145f28ec79772af182b59fc32b6c85afbc9dae8b4.jpg)  
Fi <sub>g</sub> u re 8<sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F976875e47e03d0850964eacfaa3c8c30698699121dea4d53d679f875173eb363.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fafa5a846357ff0fa3c3f4953c3bd4113a9f5249efe09a126831a8d49a13d48ab.jpg)  
F i <sub>g</sub> u re 1 0 <sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Facfbf869472fd212275180abc242fd2f4658ff5a2c7580ad7d35a06689a9fdaa.jpg)

I N L  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fc67c4c922013893c6a295dda4a037ab6e43957ba4a123c3f41214c4cc6af162f.jpg)  
Fi <sub>g</sub> u re 1 2 <sub>.</sub>

DNL

TYPICAL CHARACTERISTICS ADS7866 (continued)  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F79a29f7d27cbfaf26e0fddd868336319e65c3b9394c302acb641a309ecd25c93.jpg)  
Fi <sub>g</sub> u re 1 3 <sub>.</sub>

I N L  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F8dc608398911c762067cfb461f167e663d0c656b769a0ed271587a8d3297a35f.jpg)  
Fi <sub>g</sub> u re 1 4<sub>.</sub>

DNL  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F5a5af38f52502fa73c10fb5d16e5f5ab4712ceb7eae73cec54788a00e6ef9a0c.jpg)  
Fi <sub>g</sub> u re 1 5 <sub>.</sub>

## TYPICAL CHARACTERISTICS ADS7866 (continued)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fb18403556d824e30d3267f6dd337ab1b8395fc85e605f5a1f292b758174f516c.jpg)  
F i <sub>g</sub> u re 1 6 <sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F84f8d611b699fde64c8ba45366548468c3a3ed7d7c5eb6575c6373b726184f4a.jpg)  
F i <sub>g</sub> u re 1 7 <sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F34f6b2f3e84bd6c61fa09e6fef511da8c122fa982d98df55061fb0e11f42eec0.jpg)  
Fi <sub>g</sub> u re 1 8<sub>.</sub>

TYPICAL CHARACTERISTICS ADS7867 FFT (81 92 Poi nts)  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fedccef331e113116aba3f539ddda6b03a11aa4ec91bc119b75690fd0e409edbc.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fa1959fd70fab2cccae6f6792d00cbe63b8cb72e4b669d254ba6d36543a9433a3.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F21acadf08af55912ef9fc040695215112c740b6c386f279e989079a0e04de7b5.jpg)  
F i <sub>g</sub> u re 2 1 <sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F72a88441b3adee564699ad3dff6337878b16e49629710efa75a23e706e10c594.jpg)  
Fi<sub>g</sub> u re 22<sub>.</sub>

FFT (81 92 Poi nts)  
TYPICAL CHARACTERISTICS ADS7868  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fa1984253cc8a9be1f5d0e61987bab43d1a148f257dfac2d111aef203531d6a76.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F9f87c16a481a3621f4f610239c64f872addfd8a38049e263baec27a54bfb1519.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F20a8ca05b5a62819903befc5ec8982f6400ba35e9c02be51df14c0e93dfd1e66.jpg)  
Fi<sub>g</sub> u re 25<sub>.</sub>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F92fca392971f43b2082389f9a34c51ebc29992f8e543aa6c3e511d278c9ad6eb.jpg)  
Fi<sub>g</sub> u re 26<sub>.</sub>

## TH EORY OF OPERATION

The ADS7866/67/68 is a fam i l<sub>y</sub> of low su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e <sub>,</sub> low <sub>p</sub>owe r<sub>,</sub> h i<sub>g</sub> h-s<sub>p</sub>eed successive a<sub>pp</sub> roxi mation re<sub>g</sub> iste r (SAR) analog-to-d ig ital conve rte rs (ADCs) The devices can be ope rated from a su pply range from 1 2 V to 3 6 V The re is no need fo r an exte rnal refe rence The refe rence is de rived i nte rnal l<sub>y</sub> from the su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e so the analo<sub>g</sub> i n <sub>p</sub>ut ran<sub>g</sub>e can be from 0 V to $\mathsf { V } _ { \mathsf { D D } }$ These ADCs use a char<sub>g</sub>e red istri bution arch itectu re wh ich i n he rentl<sub>y</sub> i ncl udes a sam <sub>p</sub>l e/hold fu nction

## START OF A CONVERSION CYCLE

A conve rsion c<sub>y</sub>cl e is i n itiated b<sub>y</sub> b ri n<sub>g</sub> i n<sub>g</sub> the $\overline { { \mathsf { C S } } }$ <sub>p</sub>i n low and su <sub>pp</sub>l<sub>y</sub>i n<sub>g</sub> the se rial clock SC LK<sub>.</sub> The ti me between the fal l i n<sub>g</sub> ed<sub>g</sub>e of CS and the th i rd fal l i n<sub>g</sub> ed<sub>g</sub>e of SC LK afte r CS fal ls is used to ac<sub>q</sub> u i re the i n <sub>p</sub> ut si <sub>g</sub> nal <sub>.</sub> Th is m ust be g reate r than o r eq ual to the m i n i m u m acq u isition ti me ( M I N $\mathsf { t } _ { \mathsf { S A M P L E } }$ i n Table 1 ) specified fo r the desi red resol ution and su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e On the th i rd fal l i n<sub>g</sub> ed<sub>g</sub>e of SC LK afte r CS fal ls the device <sub>g</sub>oes i nto hold mode and the <sub>p</sub> rocess of d i <sub>g</sub> itizi n<sub>g</sub> the sam <sub>p</sub>l ed i n <sub>p</sub> ut si <sub>g</sub> nal starts <sub>.</sub>

## Ac<sub>q</sub>u isition Ti me Conversion Ti me and Total C<sub>y</sub>cle Ti me

The maxi m u m SC LK freq uency is dete rm i ned by the m i n i m u m acq u isition ti me (M I N $\mathfrak { t } _ { \mathsf { S A M P L E } } )$ s<sub>p</sub>ecified fo r the s<sub>p</sub>ecific resol ution and su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e of the device <sub>.</sub> The conve rsion ti me is dete rm i ned b<sub>y</sub> the fre<sub>q</sub> uenc<sub>y</sub> of SC LK si nce th is is a s<sub>y</sub>nch ronous conve rte r The conve rsion ti me is 1 3 ti mes the SC LK c<sub>y</sub>cle ti me $\mathsf { t } _ { \mathsf { C } ( \mathsf { S C L K } ) }$ fo r t h e ADS7866 1 1 ti mes for the ADS7867 and 9 ti mes for the ADS7868 The ac<sub>q</sub> u isition ti me wh ich is also the <sub>p</sub>owe r u <sub>p</sub> ti me is the set- u <sub>p</sub> ti me between the fi rst fal l i n<sub>g</sub> ed<sub>g</sub>e of SC LK afte r CS fal ls $( \tt t _ { S U ( C S F - F S C L K F ) } )$ <sub>p</sub>l us 2 t i m es t<sub>C(SC LK) .</sub>

The total c<sub>y</sub>cle ti me $\mathsf { t } _ { \mathsf { C Y C L E } } ,$ wh ich is the i nve rse of the maxi m u m sam <sub>p</sub>le rate can be calcu lated as fol lows :

$$
t _ {C Y C L E} = t _ {S A M P L E} + t _ {C O N V E R T} + 0. 5 \times t _ {C (S C L K)}
$$

$$
i f t _ {D I S (E O C - S D O Z)} + t _ {S U (L S B Z - C S F)} \leq 0. 5 \times t _ {C (S C L K)}
$$

$$
t _ {\text { CYCLE }} = t _ {\text { SAMPLE }} + t _ {\text { CONVERT }} + t _ {\text { DIS(EOC - SDOZ) }} + t _ {\text { SU(LSBZ - CSF) }}
$$

$$
\mathrm {if t_ {DIS(EOC - SDOZ)} + t_ {SU(LSBZ - CSF)} > 0.5\times t_ {C(SCLK)}}
$$

## TH EORY OF OPERATION (continued)

Table 1 <sub>.</sub> Ac<sub>q</sub> u isition Conversion SCLK and Potential Th rou<sub>g</sub> h <sub>p</sub>ut Calcu lation

<table><tr><td colspan="2">PARAMETER</td><td>SUPPLY VOLTAGE</td><td>ADS7866</td><td>ADS7867</td><td>ADS7868</td><td>UNIT</td></tr><tr><td rowspan="3">MIN tsU(CSF-FSCLKF)</td><td rowspan="3">Setup time</td><td>1.2 V ≤ VDD&lt; 1.6 V</td><td>192</td><td>192</td><td>192</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>55</td><td>55</td><td>55</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>55</td><td>55</td><td>55</td></tr><tr><td rowspan="3">MAX tDIS(EOC-SDOZ)</td><td rowspan="3">Disable time</td><td>1.2 V ≤ VDD&lt; 1.6V</td><td>80</td><td>80</td><td>80</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>60</td><td>60</td><td>60</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>60</td><td>60</td><td>60</td></tr><tr><td rowspan="3">MIN tsU(LSBZ-CSF)</td><td rowspan="3">Setup time</td><td>1.2 V ≤ VDD&lt; 1.6 V</td><td>20</td><td>20</td><td>20</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>10</td><td>10</td><td>10</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>10</td><td>10</td><td>10</td></tr><tr><td rowspan="3">MAX fsCLK</td><td rowspan="3">Frequency</td><td>1.2 V ≤ VDD&lt; 1.6 V</td><td>1.7</td><td>1.7</td><td>1.7</td><td rowspan="3">MHz</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>3.4</td><td>3.4</td><td>3.4</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>3.4</td><td>3.4</td><td>3.4</td></tr><tr><td rowspan="3">MIN tsample</td><td rowspan="3">Sample time</td><td>1.2 V ≤ VDD&lt; 1.6 V</td><td>1368</td><td>1368</td><td>1368</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>643</td><td>643</td><td>643</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>643</td><td>643</td><td>643</td></tr><tr><td rowspan="3">MIN tconvert</td><td rowspan="3">Conversion time</td><td>1.2 V ≤ VDD&lt; 1.6 V</td><td>7647</td><td>6471</td><td>5294</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>3824</td><td>3235</td><td>2647</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>3824</td><td>3235</td><td>2647</td></tr><tr><td rowspan="3">MIN tCYCLE</td><td rowspan="3">Cycle time</td><td>1.2 V ≤ VDD&lt; 1.6 V</td><td>9116</td><td>7939</td><td>6763</td><td rowspan="3">ns</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>4537</td><td>3949</td><td>3360</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>4537</td><td>3949</td><td>3360</td></tr><tr><td rowspan="3">fsample</td><td rowspan="3">Theoretical sample frequency</td><td>1.2 V ≤ VDD&lt; 1.6 V</td><td>110</td><td>126</td><td>148</td><td rowspan="3">KSPS</td></tr><tr><td>1.6 V ≤ VDD&lt; 1.8 V</td><td>220</td><td>253</td><td>298</td></tr><tr><td>1.8 V ≤ VDD≤ 3.6 V</td><td>220</td><td>253</td><td>298</td></tr></table>

## TYPICAL CONNECTION

For a t<sub>yp</sub>ical con nection ci rcu it for the ADS7866/67/68 see Fi<sub>g</sub> u re 27<sub>.</sub> A R E F3 1 1 2 is used to su <sub>pp</sub>l<sub>y</sub> 1 <sub>.</sub>2 V to the device A 0 1 -<sub>µ</sub> F decou <sub>p</sub>l i n<sub>g</sub> ca<sub>p</sub>acitor is re<sub>q</sub> u i red between the $\mathsf { R E F } N _ { \mathsf { D D } }$ and G N D <sub>p</sub>i ns of the conve rte r<sub>.</sub> Th is ca<sub>p</sub>acito r shou ld be <sub>p</sub>laced as close as <sub>p</sub>ossi ble to the <sub>p</sub>i ns of the device <sub>.</sub> Desi<sub>g</sub> ne rs shou ld strive to m i n i m ize the routi n<sub>g</sub> l en<sub>g</sub>th of the traces that con nect the te rm i nals of the ca<sub>p</sub>acito r to the <sub>p</sub>i ns of the conve rte r<sub>.</sub>

Keep i n m i nd the conve rte r offe rs no i n he rent rejection of noise o r voltage variation i n regards to the refe rence i n <sub>p</sub>ut <sub>.</sub> Th is is of <sub>p</sub>articu lar conce rn because the refe rence i n <sub>p</sub>ut is tied to the <sub>p</sub>owe r su <sub>pp</sub>l<sub>y.</sub> An<sub>y</sub> noise and ri <sub>pp</sub>le from the su <sub>pp</sub>l<sub>y</sub> a<sub>pp</sub>ears d i rectl<sub>y</sub> i n the d i<sub>g</sub> ital resu lts <sub>.</sub> Wh i le h i<sub>g</sub> h fre<sub>q</sub> uenc<sub>y</sub> noise can be fi lte red out as descri bed i n the p revious parag raph voltage variation d ue to the l i ne freq uency (50 Hz o r 60 Hz) can be d ifficu lt to remove

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F31ed61d315e03d02e35281ea7801c1f7f1a39f9aa6990d96794da0307667308e.jpg)  
Fi<sub>g</sub> u re 27<sub>.</sub> T<sub>yp</sub>ical Ci rcu it Confi<sub>g</sub> u ration

## ANALOG INPUT

Fi<sub>g</sub> u re 28 shows the analo<sub>g</sub> i n <sub>p</sub>ut e<sub>q</sub> u ivalent ci rcu it for the ADS7866/67/68 The analo<sub>g</sub> i n <sub>p</sub>ut is <sub>p</sub> rovided between the V I N and G N D <sub>p</sub>i ns <sub>.</sub> When a conve rsion is i n itiated the i n <sub>p</sub>ut si<sub>g</sub> nal is sam <sub>p</sub>led on the i nte rnal ca<sub>p</sub>acito r arra<sub>y</sub> When the conve rte r ente rs hold mode the i n <sub>p</sub>ut si<sub>g</sub> nal is ca<sub>p</sub>tu red on the i nte rnal ca<sub>p</sub>acito r arra<sub>y.</sub> The V I N i n <sub>p</sub>ut ran<sub>g</sub>e is l i m ited to 0 V to $\mathsf { V } _ { \mathsf { D D } }$ because the refe rence is de rived from the su <sub>pp</sub>l<sub>y.</sub>

The cu rrent flowi n<sub>g</sub> i nto the analo<sub>g</sub> i n <sub>p</sub>ut de<sub>p</sub>ends u <sub>p</sub>on a n u m be r of facto rs such as the sam <sub>p</sub>le rate the i n <sub>p</sub>ut volta<sub>g</sub>e and the i n <sub>p</sub>ut sou rce i m <sub>p</sub>edance The cu rrent from the i n <sub>p</sub>ut sou rce char<sub>g</sub>es the i nte rnal ca<sub>p</sub>acito r arra<sub>y</sub> d u ri n<sub>g</sub> the sam <sub>p</sub>l e <sub>p</sub>e riod <sub>.</sub> Afte r th is ca<sub>p</sub>acitance has been fu l l<sub>y</sub> char<sub>g</sub>ed the re is no fu rthe r i n <sub>p</sub> ut cu rrent <sub>.</sub> The sou rce of the analo i n ut volta e m ust be able to char e the i n ut ca acitance ${ \sf C } _ { \sf S }$ ( 1 2 p F typi cal) with i n the m i n i m u m acq u isition ti me ( M I N $\mathfrak { t } _ { \mathsf { S A M P L E } } )$ s<sub>p</sub>ecified fo r the desi red resol ution and su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e <sub>.</sub> I n the case of the ADS7866 the M I N $\mathsf { t } _ { \mathsf { S A M P L E } }$ fo r 1 2-bit resol ution is 643 ns $( \mathsf { V } _ { \mathsf { D } \mathsf { D } }$ between 1 6 V and 3 6 V) When the converter <sub>g</sub>oes i nto hold mode the i n <sub>p</sub>ut i m <sub>p</sub>edance is <sub>g</sub> reate r than 1 GΩ

Care m ust be taken re<sub>g</sub>ard i n<sub>g</sub> the absol ute analo<sub>g</sub> i n <sub>p</sub>ut volta<sub>g</sub>e <sub>.</sub> I n o rde r to mai ntai n the l i nearit<sub>y</sub> of the conve rte r the span (V I N – G N D) shou ld be with i n the l i m its specified <sub>.</sub> Outside of these l i m its the conve rte r<sup>’</sup>s l i nearit<sub>y</sub> ma<sub>y</sub> not meet s<sub>p</sub>ecifications <sub>.</sub> N oise i ntrod uced i nto the conve rte r from the i n <sub>p</sub>ut sou rce ma<sub>y</sub> be m i n i m ized b<sub>y</sub> usi n<sub>g</sub> low bandwidth i n <sub>p</sub>ut si<sub>g</sub> nals alon<sub>g</sub> with low-<sub>p</sub>ass fi lte rs

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F17edd9f91725785a10f899d7bc128d0bad6be8bcaed7ef9c6ac2cf9290088ef6.jpg)  
Fig u re 28<sub>.</sub> Analog I n put Eq u ivalent Ci rcu it (Typical I m pedance Val ues at $\mathsf { V } _ { \mathsf { D D } } = 1 . 6 \ \mathsf { V } , \mathsf { T } _ { \mathsf { A } } = 2 7 ^ { \circ } \mathsf { C } )$

## Choice of I n <sub>p</sub>ut Drivi n<sub>g</sub> Am <sub>p</sub>l ifier

The analo<sub>g</sub> i n <sub>p</sub>ut to the conve rte r needs to be d riven with a low noise low volta<sub>g</sub>e o<sub>p</sub> am <sub>p</sub> l i ke the O PA364 or O PA333 An RC fi lte r is recom mended at the i n <sub>p</sub>ut <sub>p</sub>i n to low-<sub>p</sub>ass fi lte r the noise from the sou rce The i n <sub>p</sub>ut to the conve rte r is a u n i <sub>p</sub>olar i n <sub>p</sub> ut volta<sub>g</sub>e i n the ran<sub>g</sub>e 0 V to $\mathsf { V } _ { \mathsf { D D } }$

## DIGITAL INTERFACE

The ADS7866/67/68 i nte rface with m icro<sub>p</sub> rocessors or DS Ps th rou<sub>g</sub> h a h i<sub>g</sub> h-s<sub>p</sub>eed S P I com <sub>p</sub>ati ble se rial i nte rface with C PO L = 1 (i nactive SC LK retu rns to log ic h ig h or SC LK lead i ng edge is the risi ng edge) C P HA = 1 (output data changes on fal l i ng edge of SC LK and is avai lable on the risi ng edge of SC LK) The sam pl i ng conve rsion and activation of S DO are i n itiated on the fal l i ng edge of CS <sub>.</sub> The se rial clock (SC LK) is used fo control l i n<sub>g</sub> the rate of conve rsion <sub>.</sub> It also <sub>p</sub> rovides a mechan ism al lowi n<sub>g</sub> s<sub>y</sub>nch ron ization with d i<sub>g</sub> ital host p rocesso rs <sub>.</sub>

The d i<sub>g</sub> ital i n <sub>p</sub>uts CS and SC LK can exceed the su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e $\mathsf { V } _ { \mathsf { D D } }$ as lon<sub>g</sub> as the<sub>y</sub> do not exceed the maxi m u m $\mathsf { V } _ { \mathsf { H } }$ of 3 6 V Th is al lows the ADS7866/67/68 fam i l<sub>y</sub> to i nte rface with host <sub>p</sub> rocesso rs wh ich use a d iffe rent su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e than the conve rte r without re<sub>q</sub> u i ri n<sub>g</sub> exte rnal l eve l -sh ifti n<sub>g</sub> ci rcu itr<sub>y.</sub> Fu rthe rmo re the d i<sub>g</sub> ital i n <sub>p</sub>uts can be a<sub>pp</sub>l ied to CS and SC LK before the su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>e of the conve rte r is activated without the risk of creati n<sub>g</sub> a latch - u <sub>p</sub> cond ition <sub>.</sub>

## Conversion Resu lt

The ADS7866/67/68 out<sub>p</sub>uts 1 2/1 0/8-bit data afte r 4 lead i n<sub>g</sub> ze ros res<sub>p</sub>ectivel<sub>y</sub> These codes are i n strai<sub>g</sub> ht bi nar<sub>y</sub> fo rmat as shown i n Table 2 <sub>.</sub>

The se rial out<sub>p</sub>ut S DO is activated on the fal l i n<sub>g</sub> ed<sub>g</sub>e of CS <sub>.</sub> The fi rst lead i n<sub>g</sub> ze ro is avai lable on S DO u nti l the fi rst fal l i n<sub>g</sub> ed<sub>g</sub>e of SC LK afte r CS fal ls <sub>.</sub> The remai n i n<sub>g</sub> 3 lead i n<sub>g</sub> ze ros are sh ifted out on S DO on the fi rst second and th i rd fal l i n<sub>g</sub> ed<sub>g</sub>es of SC LK afte r CS fal ls <sub>.</sub> The M S B of the conve rted resu lt fol lows 4 lead i n<sub>g</sub> ze ros and is clocked out on the fou rth fal l i n<sub>g</sub> ed<sub>g</sub>e of SC LK<sub>.</sub> The risi n<sub>g</sub> ed<sub>g</sub>e of CS or the fal l i n<sub>g</sub> ed<sub>g</sub>e of SC LK when the E OC occu rs <sub>p</sub>uts S DO out<sub>p</sub>ut i nto 3-state <sub>.</sub> Refe r to Table 2 fo r ideal out<sub>p</sub>ut codes ve rsus i n <sub>p</sub>ut volta<sub>g</sub>es <sub>.</sub>

Table 2<sub>.</sub> ADS7866/67/68 Ideal Out<sub>p</sub>ut Codes Versus I n <sub>p</sub>ut Volta<sub>g</sub>es

<table><tr><td rowspan="2">DESCRIPTION</td><td rowspan="2">ANALOG INPUT VOLTAGE</td><td colspan="2">DIGITAL OUTPUT STRAIGHT BINARY</td></tr><tr><td>BINARY CODE</td><td>HEX CODE</td></tr><tr><td colspan="4">ADS7866</td></tr><tr><td>Least Significant Bit (LSB)</td><td> $V_{DD}/4096$ </td><td></td><td></td></tr><tr><td>Full Scale</td><td> $V_{DD}-1LSB$ </td><td>1111 1111 1111</td><td>FFF</td></tr><tr><td>Midscale</td><td> $V_{DD}/2$ </td><td>1000 0000 0000</td><td>800</td></tr><tr><td>Midscale - 1LSB</td><td> $V_{DD}/2-1LSB$ </td><td>0111 1111 1111</td><td>7FF</td></tr><tr><td>Zero</td><td>0V</td><td>0000 0000 0000</td><td>000</td></tr><tr><td colspan="4">ADS7867</td></tr><tr><td>Least Significant Bit (LSB)</td><td> $V_{DD}/1024$ </td><td></td><td></td></tr><tr><td>Full Scale</td><td> $V_{DD}-1LSB$ </td><td>11 1111 1111</td><td>3FF</td></tr><tr><td>Midscale</td><td> $V_{DD}/2$ </td><td>10 0000 0000</td><td>200</td></tr><tr><td>Midscale - 1LSB</td><td> $V_{DD}/2-1LSB$ </td><td>01 1111 1111</td><td>1FF</td></tr><tr><td>Zero</td><td>0V</td><td>00 0000 0000</td><td>000</td></tr><tr><td colspan="4">ADS7868</td></tr><tr><td>Least Significant Bit (LSB)</td><td> $V_{DD}/256$ </td><td></td><td></td></tr><tr><td>Full Scale</td><td> $V_{DD}-1LSB$ </td><td>1111 1111</td><td>FF</td></tr><tr><td>Midscale</td><td> $V_{DD}/2$ </td><td>1000 0000</td><td>80</td></tr><tr><td>Midscale - 1LSB</td><td> $V_{DD}/2-1LSB$ </td><td>0111 1111</td><td>7F</td></tr><tr><td>Zero</td><td>0V</td><td>0000 0000</td><td>00</td></tr></table>

## POWER DISSIPATION

The ADS7866/67/68 fam i l<sub>y</sub> is ca<sub>p</sub>able of o<sub>p</sub>e rati n<sub>g</sub> with ve r<sub>y</sub> low su <sub>pp</sub>l<sub>y</sub> volta<sub>g</sub>es wh i le d rawi n<sub>g</sub> a fraction of a m i l l iam <sub>p</sub> Fu rthe rmore the re is an auto <sub>p</sub>owe r-down mode to red uce the <sub>p</sub>owe r d issi <sub>p</sub>ation between conve rsion c<sub>y</sub>cles Carefu l l<sub>y</sub> selected s<sub>y</sub>stem desi<sub>g</sub> n can take advanta<sub>g</sub>e of these featu res to ach ieve o<sub>p</sub>ti m u m <sub>p</sub>owe r pe rformance <sub>.</sub>

## Auto Power-Down Mode

The ADS7866/67/68 fam i l<sub>y</sub> has an auto <sub>p</sub>owe r-down featu re Besides <sub>p</sub>owe ri n<sub>g</sub> down al l ci rcu itr<sub>y</sub> the conve rte r consu mes on l<sub>y</sub> 8 nA t<sub>yp</sub>ical l<sub>y</sub> i n th is mode The device automatical l<sub>y</sub> wakes u <sub>p</sub> when CS fal ls Howeve r not al l of the fu nctional blocks are fu l l<sub>y p</sub>owe red u nti l someti me befo re the th i rd fal l i n<sub>g</sub> ed<sub>g</sub>e of SC LK The device <sub>p</sub>owe rs down once it reaches the end of conve rsion ( E OC) wh ich is the 1 6th fal l i ng edge of SC LK fo r the ADS7866 (the 1 4th and 1 2th for the ADS7867 and ADS7868 respectively) If CS is pu l led h ig h before the device reaches the E OC the conve rte r <sub>g</sub>oes i nto <sub>p</sub>owe r-down mode and the on<sub>g</sub>oi n<sub>g</sub> conve rsion is aborted <sub>.</sub> Refe r to the ti m i n<sub>g</sub> d ia<sub>g</sub> ram i n Fi <sub>g</sub> u re 1 fo r fu rthe r i nfo rmation

## Power Savi n<sub>g</sub> : SCLK Fre<sub>q</sub> uenc<sub>y</sub> and Th rou<sub>g</sub>h <sub>p</sub>ut

These conve rte rs ach ieve lowe r <sub>p</sub>owe r d issi <sub>p</sub>ation fo r a fixed th rou<sub>g</sub> h <sub>p</sub>ut rate $\mathsf { f } _ { \mathsf { s a m p l e } } = 1 / \mathsf { t } _ { \mathsf { c y c l e } }$ b<sub>y</sub> usi n<sub>g</sub> h i <sub>g</sub> he r SC LK fre<sub>q</sub> uencies H i<sub>g</sub> he r SC LK fre<sub>q</sub> uencies red uce the ac<sub>q</sub> u isition ti me $( \mathsf { t } _ { \mathsf { s a m p l e } } )$ and conve rsion ti me $( \mathfrak { t } _ { \mathtt { c o n v e r t } } )$ Th is means the conve rte rs s<sub>p</sub>end more ti me i n auto <sub>p</sub>owe r-down mode <sub>p</sub>e r conve rsion c<sub>y</sub>cle Th is can be obse rved i n Fi<sub>g</sub> u re 8 wh ich shows the ADS7866 su <sub>pp</sub>l<sub>y</sub> cu rrent ve rsus SC LK fre<sub>q</sub> uenc<sub>y</sub> for $\mathsf { f } _ { \mathsf { s a m p l e } } = 1 0 0 ~ \mathsf { K S P S }$ Fo r a <sub>p</sub>articu lar SC LK fre<sub>q</sub> uenc<sub>y</sub> the ac<sub>q</sub> u isition ti me and conve rsion ti me are fixed The refo re a lowe r th rou<sub>g</sub> h <sub>p</sub>ut i ncreases the <sub>p</sub> ro<sub>p</sub>o rtion of the ti me the conve rte rs are i n <sub>p</sub>owe r down Fi<sub>g</sub> u re 1 0 shows th is case fo r the ADS7866 <sub>p</sub>owe r consu m <sub>p</sub>tion ve rsus th rou<sub>g</sub> h <sub>p</sub>ut rate fo r $\mathsf { f } _ { \mathsf { S C L K } } = 3 . 4 ~ \mathsf { M H z }$

## Power-On I n itial ization

The re is no s<sub>p</sub>ecifi c i n itial ization re<sub>q</sub> u i rement fo r these conve rte rs afte r <sub>p</sub>owe r-on b ut the fi rst conve rsion m i <sub>g</sub> ht not <sub>y</sub>ield a val id resu lt<sub>.</sub> I n o rde r to set the conve rte r i n a known state CS shou ld be to<sub>gg</sub> led low then h i<sub>g</sub> h afte r $\mathsf { V } _ { \mathsf { D D } }$ has stabi l ized d u ri n<sub>g p</sub>owe r-on <sub>.</sub> B<sub>y</sub> doi n<sub>g</sub> th is the conve rte r is <sub>p</sub>laced i n auto <sub>p</sub>owe r-down mode and the se rial data output (S DO) is 3-stated

## PACKAGING INFORMATION

<table><tr><td>Orderable part number</td><td>Status(1)</td><td>Material type(2)</td><td>Package | Pins</td><td>Package qty | Carrier</td><td>RoHS(3)</td><td>Lead finish/ Ball material(4)</td><td>MSL rating/ Peak reflow(5)</td><td>Op temp (°C)</td><td>Part marking(6)</td></tr><tr><td>ADS7866IDBVR</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A66Y</td></tr><tr><td>ADS7866IDBVR.A</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A66Y</td></tr><tr><td>ADS7866IDBVRG4</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A66Y</td></tr><tr><td>ADS7866IDBVRG4.A</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A66Y</td></tr><tr><td>ADS7866IDBVT</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A66Y</td></tr><tr><td>ADS7866IDBVT.A</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A66Y</td></tr><tr><td>ADS7866IDBVTG4</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A66Y</td></tr><tr><td>ADS7867IDBVR</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A67Y</td></tr><tr><td>ADS7867IDBVR.A</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A67Y</td></tr><tr><td>ADS7867IDBVT</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-250C-1 YEAR</td><td>-40 to 85</td><td>A67Y</td></tr><tr><td>ADS7867IDBVT.A</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-250C-1 YEAR</td><td>-40 to 85</td><td>A67Y</td></tr><tr><td>ADS7868IDBVR</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A68Y</td></tr><tr><td>ADS7868IDBVR.A</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>3000 | LARGE T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A68Y</td></tr><tr><td>ADS7868IDBVT</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A68Y</td></tr><tr><td>ADS7868IDBVT.A</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A68Y</td></tr><tr><td>ADS7868IDBVTG4</td><td>Active</td><td>Production</td><td>SOT-23 (DBV) | 6</td><td>250 | SMALL T&amp;R</td><td>Yes</td><td>NIPDAU</td><td>Level-2-260C-1 YEAR</td><td>-40 to 85</td><td>A68Y</td></tr></table>

<sup>(1)</sup> Status: For more details on status, see our product life cycle.

<sup>(6)</sup> Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part.

Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "\~" will appear on a part. If a line is indented then it is a continuation of the previous line and the tw combined represent the entire part marking for that device

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, an makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representativ and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS number and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

TAPE AND REEL INFORMATION  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F03ce9a91d1a1cfe6d31d88da3525911f8d7be745dfcc584ff3a2314fba8465a6.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F89ac45b0843cd32688b3f00d92f82f033de877fcb26777d419e8f7a193cbf1d0.jpg)

<table><tr><td>A0</td><td>Dimension designed to accommodate the component width</td></tr><tr><td>B0</td><td>Dimension designed to accommodate the component length</td></tr><tr><td>K0</td><td>Dimension designed to accommodate the component thickness</td></tr><tr><td>W</td><td>Overall width of the carrier tape</td></tr><tr><td>P1</td><td>Pitch between successive cavity centers</td></tr></table>

Reel Width (W1)  
QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE  
![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Ff19942fe0fa0c27645a5aac4c5f72507456a490c4f2a3d848b957515d1476267.jpg)

\*All dimensions are nomina

<table><tr><td>Device</td><td>Package Type</td><td>Package Drawing</td><td>Pins</td><td>SPQ</td><td>Reel Diameter (mm)</td><td>Reel Width W1 (mm)</td><td>A0 (mm)</td><td>B0 (mm)</td><td>K0 (mm)</td><td>P1 (mm)</td><td>W (mm)</td><td>Pin1 Quadrant</td></tr><tr><td>ADS7866IDBVR</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>180.0</td><td>8.4</td><td>3.15</td><td>3.1</td><td>1.55</td><td>4.0</td><td>8.0</td><td>Q3</td></tr><tr><td>ADS7866IDBVRG4</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>180.0</td><td>8.4</td><td>3.15</td><td>3.1</td><td>1.55</td><td>4.0</td><td>8.0</td><td>Q3</td></tr><tr><td>ADS7866IDBVT</td><td>SOT-23</td><td>DBV</td><td>6</td><td>250</td><td>180.0</td><td>8.4</td><td>3.15</td><td>3.1</td><td>1.55</td><td>4.0</td><td>8.0</td><td>Q3</td></tr><tr><td>ADS7867IDBVR</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>180.0</td><td>8.4</td><td>3.15</td><td>3.1</td><td>1.55</td><td>4.0</td><td>8.0</td><td>Q3</td></tr><tr><td>ADS7867IDBVT</td><td>SOT-23</td><td>DBV</td><td>6</td><td>250</td><td>180.0</td><td>8.4</td><td>3.15</td><td>3.1</td><td>1.55</td><td>4.0</td><td>8.0</td><td>Q3</td></tr><tr><td>ADS7868IDBVR</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>180.0</td><td>8.4</td><td>3.15</td><td>3.1</td><td>1.55</td><td>4.0</td><td>8.0</td><td>Q3</td></tr><tr><td>ADS7868IDBVT</td><td>SOT-23</td><td>DBV</td><td>6</td><td>250</td><td>180.0</td><td>8.4</td><td>3.15</td><td>3.1</td><td>1.55</td><td>4.0</td><td>8.0</td><td>Q3</td></tr></table>

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F48bb4baf47660029b258c3d2b8d464d9f94c4350f3dd0831adb8af06db600241.jpg)

\*All dimensions are nominal

<table><tr><td>Device</td><td>Package Type</td><td>Package Drawing</td><td>Pins</td><td>SPQ</td><td>Length (mm)</td><td>Width (mm)</td><td>Height (mm)</td></tr><tr><td>ADS7866IDBVR</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>213.0</td><td>191.0</td><td>35.0</td></tr><tr><td>ADS7866IDBVRG4</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>213.0</td><td>191.0</td><td>35.0</td></tr><tr><td>ADS7866IDBVT</td><td>SOT-23</td><td>DBV</td><td>6</td><td>250</td><td>213.0</td><td>191.0</td><td>35.0</td></tr><tr><td>ADS7867IDBVR</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>213.0</td><td>191.0</td><td>35.0</td></tr><tr><td>ADS7867IDBVT</td><td>SOT-23</td><td>DBV</td><td>6</td><td>250</td><td>213.0</td><td>191.0</td><td>35.0</td></tr><tr><td>ADS7868IDBVR</td><td>SOT-23</td><td>DBV</td><td>6</td><td>3000</td><td>213.0</td><td>191.0</td><td>35.0</td></tr><tr><td>ADS7868IDBVT</td><td>SOT-23</td><td>DBV</td><td>6</td><td>250</td><td>213.0</td><td>191.0</td><td>35.0</td></tr></table>

4214840/G 08/2024

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F0f7a0e6180bafb58311349d723d8de7ad5d32e942a21824a568f0826bfd010ef.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Fb4eb96fc73c67db67f5b5b48d30b97f4f9e21020c4ce3ccf237c16d1a158f369.jpg)

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F6cab3f94076785d2f71f56caad59fb5e9bd1661915ecee3b89a512a72a164394.jpg)

## NOTES:

1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M.

2. This drawing is subject to change without notice.

3. Body dimensions do not include mold flash or protrusion. Mold flash and protrusion shall not exceed 0.25 per side.

4. Leads 1,2,3 may be wider than leads 4,5,6 for package orientation.

5. Refernce JEDEC MO-178.

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2Ffd67c65680f1a03785831a6e57bcf0e98618f281330d667c6c3f8a4d1d2dc672.jpg)  
NOTES: (continued)

6. Publication IPC-7351 may have alternate designs.

7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.

SMALL OUTLINE TRANSISTOR

![](https://www.embedr.app/api/datasheets/ds_5146827c8b73d940528f/asset?path=images%2F8259cbb316767fe5bd7742f5ef3a38e7e41e0f20cccc47cdc6adad3fcaeab52a.jpg)  
SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE:15X

4214840/G 08/2024

NOTES: (continued)

8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations.

9. Board assembly site may have different recommendations for stencil design.