{"datasheetId":"ds_73f28de230e5ca958c46","chunkCount":122,"revision":"2026-11-09T20:02:54.347Z","source":"index","nextCursor":"49","chunks":[{"chunkId":"ds_73f28de230e5ca958c46-chunk-0001","chunkIndex":0,"heading":"Data Sheet","headingPath":["Data Sheet"],"preview":"Data Sheet ADF4351 FEATURES Output frequency range: 35 MHz to 4400 MHz Fractional N synthesizer and integer N synthesizer Low phase noise VCO Programmable divide by 1/ 2/ 4/ 8/ 16/ 32/ 64 output Typical jitter: 0.3 ps rms Typical EVM at 2.1","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0001"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0002","chunkIndex":1,"heading":"APPLICATIONS","headingPath":["Data Sheet","APPLICATIONS"],"preview":"APPLICATIONS Wireless infrastructure (W CDMA, TD SCDMA, WiMAX, GSM, PCS, DCS, DECT) Test equipment Wireless LANs, CATV equipment Clock generation GENERAL DESCRIPTION The ADF4351 allows implementation of fractional N or integer N phase locke","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0002"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0003","chunkIndex":2,"heading":"GENERAL DESCRIPTION","headingPath":["Data Sheet","GENERAL DESCRIPTION"],"preview":"Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0003"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0004","chunkIndex":3,"heading":"TABLE OF CONTENTS","headingPath":["Data Sheet","TABLE OF CONTENTS"],"preview":"TABLE OF CONTENTS Features .... 1 Applications.... 1 General Description .... 1 Functional Block Diagram .... 1 Revision History .... 2 Specifications.... 3 Timing Characteristics .... 5 Absolute Maximum Ratings.... 6 Transistor Count.... 6","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0004"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0005","chunkIndex":4,"heading":"REVISION HISTORY","headingPath":["Data Sheet","REVISION HISTORY"],"preview":"REVISION HISTORY 5/2012—Revision 0: Initial Version 1/2017—Rev. 0 to Rev. A Changed CP 32 2 to CP 32 7....Throughout Change to Figure 3....7 Updated Outline Dimension....28 Changes to Ordering Guide....28 Register 1....18 Register 2....18 R","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0005"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0006","chunkIndex":5,"heading":"SPECIFICATIONS","headingPath":["Data Sheet","SPECIFICATIONS"],"preview":"SPECIFICATIONS $\\mathrm { A V { D D } = D V { D D } = V { V C O } = S D V { D D } = V { P } = 3 . 3 \\ V \\pm 1 0 ^ { 9 } \\omega ; A G N D = D G N D = 0 \\ V ; T { A } = T { A I N } = T { A N } = 0 . 3 4 4 w / k W }$ to TMAX, unless otherwise","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0006"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0007","chunkIndex":6,"heading":"SPECIFICATIONS","headingPath":["Data Sheet","SPECIFICATIONS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0007"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0008","chunkIndex":7,"heading":"SPECIFICATIONS","headingPath":["Data Sheet","SPECIFICATIONS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0008"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0009","chunkIndex":8,"heading":"TIMING CHARACTERISTICS","headingPath":["Data Sheet","TIMING CHARACTERISTICS"],"preview":"Table 2.","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0009"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0010","chunkIndex":9,"heading":"Timing Diagram","headingPath":["Data Sheet","Timing Diagram"],"preview":"Timing Diagram Figure 2. Timing Diagram ABSOLUTE MAXIMUM RATINGS $\\mathrm { T { A } } = 2 5 ^ { \\circ } \\mathrm { C } ,$ unless otherwise noted. Table 3.","images":[{"path":"images/fc548f3a7b01249e904325d97a61e4c69da14b677b1c729156f7ea9903d57535.jpg","name":"fc548f3a7b01249e904325d97a61e4c69da14b677b1c729156f7ea9903d57535.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Ffc548f3a7b01249e904325d97a61e4c69da14b677b1c729156f7ea9903d57535.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0010"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0011","chunkIndex":10,"heading":"$\\mathrm { T _ { A } } = 2 5 ^ { \\circ } \\mathrm { C } ,$ unless otherwise noted.","headingPath":["Data Sheet","$\\mathrm { T _ { A } } = 2 5 ^ { \\circ } \\mathrm { C } ,$ unless otherwise noted."],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0011"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0012","chunkIndex":11,"heading":"TRANSISTOR COUNT","headingPath":["Data Sheet","TRANSISTOR COUNT"],"preview":"TRANSISTOR COUNT The transistor count for the ADF4351 is 36,955 (CMOS) and 986 (bipolar). THERMAL RESISTANCE Thermal impedance $\\left( \\mathsf { \\theta } { \\mathrm { { J A } } } \\right)$ is specified for a device with the exposed pad solder","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0012"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0013","chunkIndex":12,"heading":"PIN CONFIGURATION AND FUNCTION DESCRIPTIONS","headingPath":["Data Sheet","PIN CONFIGURATION AND FUNCTION DESCRIPTIONS"],"preview":"PIN CONFIGURATION AND FUNCTION DESCRIPTIONS Figure 3. Pin Configuration Table 5. Pin Function Descriptions","images":[{"path":"images/4d3214932a21ddd16dfd49b6e90958f9f58405277a2f41fa1178c7a254c823bc.jpg","name":"4d3214932a21ddd16dfd49b6e90958f9f58405277a2f41fa1178c7a254c823bc.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F4d3214932a21ddd16dfd49b6e90958f9f58405277a2f41fa1178c7a254c823bc.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0013"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0014","chunkIndex":13,"heading":"PIN CONFIGURATION AND FUNCTION DESCRIPTIONS","headingPath":["Data Sheet","PIN CONFIGURATION AND FUNCTION DESCRIPTIONS"],"preview":"TYPICAL PERFORMANCE CHARACTERISTICS Figure 4. Open Loop VCO Phase Noise, 2.2 GHz Figure 7. Closed Loop Phase Noise, Fundamental VCO and Dividers, VCO = 2.2 GHz, PFD = 25 MHz, Loop Filter Bandwidth = 63 kHz Figure 5. Open Loop VCO Phase Nois","images":[{"path":"images/25f2e76d709cb9efba933b1170c29541a72e9e9d0bab193ec6be4e1cc2a91bf9.jpg","name":"25f2e76d709cb9efba933b1170c29541a72e9e9d0bab193ec6be4e1cc2a91bf9.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F25f2e76d709cb9efba933b1170c29541a72e9e9d0bab193ec6be4e1cc2a91bf9.jpg"},{"path":"images/d72f969c007e77008d33b6724ae322dd48a6202d82845eca40158274aed2ef91.jpg","name":"d72f969c007e77008d33b6724ae322dd48a6202d82845eca40158274aed2ef91.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Fd72f969c007e77008d33b6724ae322dd48a6202d82845eca40158274aed2ef91.jpg"},{"path":"images/3d1656578143bb6cd65259e9b6ab13d507e0e3b17725288c307e8aab06af8b67.jpg","name":"3d1656578143bb6cd65259e9b6ab13d507e0e3b17725288c307e8aab06af8b67.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F3d1656578143bb6cd65259e9b6ab13d507e0e3b17725288c307e8aab06af8b67.jpg"},{"path":"images/0c8c89f9734d8fe344e46161661d2f75f5b5ac6c2ff34a75440ab5557fd69285.jpg","name":"0c8c89f9734d8fe344e46161661d2f75f5b5ac6c2ff34a75440ab5557fd69285.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F0c8c89f9734d8fe344e46161661d2f75f5b5ac6c2ff34a75440ab5557fd69285.jpg"},{"path":"images/6b86c12e76cf269d185a8460a00a1bd6403e4067b9c193cffe848c3be36c52ef.jpg","name":"6b86c12e76cf269d185a8460a00a1bd6403e4067b9c193cffe848c3be36c52ef.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F6b86c12e76cf269d185a8460a00a1bd6403e4067b9c193cffe848c3be36c52ef.jpg"},{"path":"images/4435cb7dce3ea4a00cfd3fe0e9d861b8a7589a0dce8f2843872676ea2ee58f97.jpg","name":"4435cb7dce3ea4a00cfd3fe0e9d861b8a7589a0dce8f2843872676ea2ee58f97.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F4435cb7dce3ea4a00cfd3fe0e9d861b8a7589a0dce8f2843872676ea2ee58f97.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0014"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0015","chunkIndex":14,"heading":"TYPICAL PERFORMANCE CHARACTERISTICS","headingPath":["Data Sheet","TYPICAL PERFORMANCE CHARACTERISTICS"],"preview":"Figure 10. Fractional N Spur Performance, Low Noise Mode, W CDMA Band; RF","images":[{"path":"images/af88041e5007ba04ea90af71d5e853a055757266d6a371e892302e844eee473a.jpg","name":"af88041e5007ba04ea90af71d5e853a055757266d6a371e892302e844eee473a.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Faf88041e5007ba04ea90af71d5e853a055757266d6a371e892302e844eee473a.jpg"},{"path":"images/a7cba4f266b2a366e09a6f8a5c58ea3230a36330fd40b4c352f2588c65ad6baf.jpg","name":"a7cba4f266b2a366e09a6f8a5c58ea3230a36330fd40b4c352f2588c65ad6baf.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Fa7cba4f266b2a366e09a6f8a5c58ea3230a36330fd40b4c352f2588c65ad6baf.jpg"},{"path":"images/d7223a7657270873c7bf12457ec8a8b1d0eca441da1ffef72c845293f74c399d.jpg","name":"d7223a7657270873c7bf12457ec8a8b1d0eca441da1ffef72c845293f74c399d.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Fd7223a7657270873c7bf12457ec8a8b1d0eca441da1ffef72c845293f74c399d.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0015"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0016","chunkIndex":15,"heading":"TYPICAL PERFORMANCE CHARACTERISTICS","headingPath":["Data Sheet","TYPICAL PERFORMANCE CHARACTERISTICS"],"preview":"Figure 13. Fractional N Spur Performance, Low Noise Mode, LTE Band; RF","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0016"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0017","chunkIndex":16,"heading":"CIRCUIT DESCRIPTION","headingPath":["Data Sheet","CIRCUIT DESCRIPTION"],"preview":"CIRCUIT DESCRIPTION REFERENCE INPUT SECTION The reference input stage is shown in Figure 16. The SW1 and SW2 switches are normally closed. The SW3 switch is normally open. When power down is initiated, SW3 is closed, and SW1 and SW2 are ope","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0017"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0018","chunkIndex":17,"heading":"RF N DIVIDER","headingPath":["Data Sheet","RF N DIVIDER"],"preview":"RF N DIVIDER The RF N divider allows a division ratio in the PLL feedback path. The division ratio is determined by the INT, FRAC, and MOD values, which build up this divider (see Figure 17). Figure 17. RF N Divider INT, FRAC, MOD, and R Co","images":[{"path":"images/1ff5c93918c837e72b60ae3d43639fdd68bac2fbac3259e1eec404f348edfea3.jpg","name":"1ff5c93918c837e72b60ae3d43639fdd68bac2fbac3259e1eec404f348edfea3.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F1ff5c93918c837e72b60ae3d43639fdd68bac2fbac3259e1eec404f348edfea3.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0018"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0019","chunkIndex":18,"heading":"where:","headingPath":["Data Sheet","where:"],"preview":"where: RF","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0019"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0020","chunkIndex":19,"heading":"Integer-N Mode","headingPath":["Data Sheet","Integer-N Mode"],"preview":"Integer N Mode If FRAC = 0 and the DB8 (LDF) bit in Register 2 is set to 1, the synthesizer operates in integer N mode. The DB8 bit in Register 2 should be set to 1 for integer N digital lock detect. R Counter The 10 bit R counter allows th","images":[{"path":"images/885143dde9a127b31aaff56fd6b1a0594ba98aa19ec82b4fa16d6af351ee3b16.jpg","name":"885143dde9a127b31aaff56fd6b1a0594ba98aa19ec82b4fa16d6af351ee3b16.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F885143dde9a127b31aaff56fd6b1a0594ba98aa19ec82b4fa16d6af351ee3b16.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0020"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0021","chunkIndex":20,"heading":"PHASE FREQUENCY DETECTOR (PFD) AND CHARGE PUMP","headingPath":["Data Sheet","PHASE FREQUENCY DETECTOR (PFD) AND CHARGE PUMP"],"preview":"When Bit DB22 is set to 1, the ABP width is programmed to 3 ns, the recommended value for integer N applications. For integer N applications, the in band phase noise is improved by enabling the shorter pulse width. The PFD frequency can ope","images":[{"path":"images/dc6ff73b1fbf881787a031aee9dff0d2622b6cf16d7e19d8144f2f388327856c.jpg","name":"dc6ff73b1fbf881787a031aee9dff0d2622b6cf16d7e19d8144f2f388327856c.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Fdc6ff73b1fbf881787a031aee9dff0d2622b6cf16d7e19d8144f2f388327856c.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0021"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0022","chunkIndex":21,"heading":"INPUT SHIFT REGISTERS","headingPath":["Data Sheet","INPUT SHIFT REGISTERS"],"preview":"INPUT SHIFT REGISTERS The ADF4351 digital section includes a 10 bit RF R counter, a 16 bit RF N counter, a 12 bit FRAC counter, and a 12 bit modulus counter. Data is clocked into the 32 bit shift register on each rising edge of CLK. The dat","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0022"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0023","chunkIndex":22,"heading":"INPUT SHIFT REGISTERS","headingPath":["Data Sheet","INPUT SHIFT REGISTERS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0023"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0024","chunkIndex":23,"heading":"PROGRAM MODES","headingPath":["Data Sheet","PROGRAM MODES"],"preview":"PROGRAM MODES Table 6 and Figure 23 through Figure 29 show how the program modes are set up in the ADF4351. The following settings in the ADF4351 are double buffered: phase value, modulus value, reference doubler, reference divide by 2, R c","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0024"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0025","chunkIndex":24,"heading":"VCO","headingPath":["Data Sheet","VCO"],"preview":"VCO The VCO core in the ADF4351 consists of three separate VCOs, each of which uses 16 overlapping bands, as shown in Figure 20, to allow a wide frequency range to be covered without a large VCO sensitivity (KV) and resultant poor phase noi","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0025"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0026","chunkIndex":25,"heading":"VCO","headingPath":["Data Sheet","VCO"],"preview":"Band selection takes 10 cycles of the PFD frequency, equal to 80 µs. If faster lock times are required, Bit DB23 in Register 3 (R3) must be set to 1. This setting allows the user to select a higher band select clock frequency of up to 500 k","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0026"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0027","chunkIndex":26,"heading":"VCO","headingPath":["Data Sheet","VCO"],"preview":"The VCO shows variation of KV as the VTUNE varies within the band and from band to band. For wideband applications covering a wide frequency range (and changing output dividers), a value of 40 MHz/V provides the most accurate $\\mathrm { K }","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0027"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0028","chunkIndex":27,"heading":"OUTPUT STAGE","headingPath":["Data Sheet","OUTPUT STAGE"],"preview":"OUTPUT STAGE The RFOUTA+ and RFOUTA− pins of the ADF4351 are connected to the collectors of an NPN differential pair driven by buffered outputs of the VCO, as shown in Figure 22. Figure 22. Output Stage To allow the user to optimize the pow","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0028"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0029","chunkIndex":28,"heading":"OUTPUT STAGE","headingPath":["Data Sheet","OUTPUT STAGE"],"preview":"An auxiliary output stage exists on the $\\mathrm { R F { O U T } B + }$ and $\\mathrm { R F { O U T } B }$ pins, providing a second set of differential outputs that can be used to drive another circuit. The auxiliary output stage can be used","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0029"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0030","chunkIndex":29,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"REGISTER MAPS REGISTER 0","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0030"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0031","chunkIndex":30,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0031"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0032","chunkIndex":31,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0032"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0033","chunkIndex":32,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"REGISTER 3","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0033"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0034","chunkIndex":33,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0034"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0035","chunkIndex":34,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"REGISTER 5","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0035"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0036","chunkIndex":35,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0036"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0037","chunkIndex":36,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0037"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0038","chunkIndex":37,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0038"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0039","chunkIndex":38,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"INTmin = 75 WITH PRESCALER = 8/9 Figure 24. Register 0 (R0)","images":[{"path":"images/2baaa4d5205f0554c529e954381a69736df3c6bb7d725b99ad2945434256a55a.jpg","name":"2baaa4d5205f0554c529e954381a69736df3c6bb7d725b99ad2945434256a55a.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F2baaa4d5205f0554c529e954381a69736df3c6bb7d725b99ad2945434256a55a.jpg"},{"path":"images/aa8d74fb305a3db9a245cf98e7c4fd2993d0721f54e90726ed54e510681840e0.jpg","name":"aa8d74fb305a3db9a245cf98e7c4fd2993d0721f54e90726ed54e510681840e0.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Faa8d74fb305a3db9a245cf98e7c4fd2993d0721f54e90726ed54e510681840e0.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0039"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0040","chunkIndex":39,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[{"path":"images/9f9f7c8f347a6b1d2d762ef7452bd28ad933880c358d455894f63de3cd3018a6.jpg","name":"9f9f7c8f347a6b1d2d762ef7452bd28ad933880c358d455894f63de3cd3018a6.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2F9f9f7c8f347a6b1d2d762ef7452bd28ad933880c358d455894f63de3cd3018a6.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0040"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0041","chunkIndex":40,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0041"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0042","chunkIndex":41,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"Figure 28. Register 4 (R4)","images":[{"path":"images/ad58e9e9964eaae015d072cb22c16755d1c5e54422821a5b2da74f2bae506e96.jpg","name":"ad58e9e9964eaae015d072cb22c16755d1c5e54422821a5b2da74f2bae506e96.jpg","mimeType":"image/jpeg","semanticKind":null,"semanticCaption":null,"viewUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/asset?path=images%2Fad58e9e9964eaae015d072cb22c16755d1c5e54422821a5b2da74f2bae506e96.jpg"}],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0042"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0043","chunkIndex":42,"heading":"REGISTER MAPS","headingPath":["Data Sheet","REGISTER MAPS"],"preview":"","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0043"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0044","chunkIndex":43,"heading":"16-Bit Integer Value (INT)","headingPath":["Data Sheet","16-Bit Integer Value (INT)"],"preview":"16 Bit Integer Value (INT) The 16 INT bits (Bits[DB30:DB15]) set the INT value, which determines the integer part of the feedback division factor. The INT value is used in Equation 1 (see the INT, FRAC, MOD, and R Counter Relationship secti","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0044"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0045","chunkIndex":44,"heading":"REGISTER 1","headingPath":["Data Sheet","REGISTER 1"],"preview":"REGISTER 1 Control Bits When Bits[C3:C1] are set to 001, Register 1 is programmed. Figure 25 shows the input data format for programming this register. Phase Adjust The phase adjust bit (Bit DB28) enables adjustment of the output phase of a","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0045"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0046","chunkIndex":45,"heading":"Prescaler Value","headingPath":["Data Sheet","Prescaler Value"],"preview":"Prescaler Value The dual modulus prescaler (P/P + 1), along with the INT, FRAC, and MOD values, determines the overall division ratio from the VCO output to the PFD input. The PR1 bit (DB27) in Register 1 sets the prescaler value. Operating","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0046"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0047","chunkIndex":46,"heading":"12-Bit Phase Value","headingPath":["Data Sheet","12-Bit Phase Value"],"preview":"12 Bit Phase Value Bits[DB26:DB15] control the phase word. The phase word must be less than the MOD value programmed in Register 1. The phase word is used to program the RF output phase from 0° to 360° with a resolution of 360°/MOD (see the","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0047"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0048","chunkIndex":47,"heading":"12-Bit Modulus Value (MOD)","headingPath":["Data Sheet","12-Bit Modulus Value (MOD)"],"preview":"12 Bit Modulus Value (MOD) The 12 MOD bits (Bits[DB14:DB3]) set the fractional modulus. The fractional modulus is the ratio of the PFD frequency to the channel step resolution on the RF output. For more information, see the 12 Bit Programma","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0048"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0049","chunkIndex":48,"heading":"Low Noise and Low Spur Modes","headingPath":["Data Sheet","Low Noise and Low Spur Modes"],"preview":"When the low spur mode is selected, dither is enabled. Dither randomizes the fractional quantization noise so that it resembles white noise rather than spurious noise. As a result, the part is optimized for improved spurious performance. Lo","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0049"},{"chunkId":"ds_73f28de230e5ca958c46-chunk-0050","chunkIndex":49,"heading":"MUXOUT","headingPath":["Data Sheet","MUXOUT"],"preview":"MUXOUT The on chip multiplexer is controlled by Bits[DB28:DB26] (see Figure 26). Note that N counter output must be disabled for VCO band selection to operate correctly. Reference Doubler Setting the DB25 bit to 0 disables the doubler and f","images":[],"readUrl":"https://www.embedr.app/api/datasheets/ds_73f28de230e5ca958c46/chunks/ds_73f28de230e5ca958c46-chunk-0050"}]}