# JST PH series — B2B-PH-K-S

## Identity and scope

- Manufacturer: J.S.T. Mfg. Co., Ltd.
- Exact part number: **B2B-PH-K-S**.
- This part is the 2-circuit, 2.00 mm-pitch, top-entry, through-hole PH-series board header. The `S2B-PH-K-S` part is the side-entry counterpart; `B2B-PH-SM4-TB` is the SMT counterpart and is not interchangeable with this record.
- The PH series is a friction-lock wire-to-board connector family. The mating receptacle for this 2-circuit header is the JST **PHR-2** housing (page 3 housing table: A 2.0 mm, B 5.8 mm), crimped with **SPH-002T-P0.5S** (AWG #30–#24, insulation O.D. 0.8–1.5 mm), **SPH-004T-P0.5S** (AWG #32–#28, insulation O.D. 0.5–0.9 mm), or the low-insertion-force **SPH-002T-P0.5L** (AWG #28–#24, insulation O.D. 0.8–1.5 mm) contacts (page 2 contact table).

## Electrical limits and environment

- Rated current: **2 A AC/DC** when using AWG #24 wire.
- Rated voltage: **100 V AC/DC**.
- Temperature range: **−40 to +105 °C**, including the temperature rise from current flow.
- Initial contact resistance is **10 mΩ maximum**; after environmental testing it is **20 mΩ maximum**.
- Insulation resistance is **1,000 MΩ minimum**. Dielectric withstand is **800 VAC for 1 minute**.
- The specified wire range is AWG #32–#24 with insulation outside diameter **0.5–1.5 mm**. These are connector-family limits; select wire, mating housing, and system protection for the actual design.

## PCB and mechanical information

- The top-entry header uses two plated through-holes on a **2.00 ±0.05 mm** pitch. The recommended hole diameter is **0.7 +0.1/0 mm**.
- The 2-circuit top-entry header row of the page 3 table gives **A = 2.0 mm** and **B = 5.9 mm** (body length); the drawing shows a **4.5 mm** deep body standing **6 mm** above the board with **(3.4) mm** pin tails. Page 1 quotes an **8 mm mounting height**, which is the mated header-plus-PHR-housing height shown as (8) in the assembly layout. Applicable board thickness is **0.8–1.6 mm**. Confirm the complete land pattern against the released KiCad footprint before fabrication.
- JST’s 2-circuit top-entry table identifies this exact part as `B2B-PH-K-S`; the post is copper alloy with tin plating and the base is natural-white PA resin.
- Contacts are passive connector pins. The datasheet does not assign a universal electrical polarity to circuit 1 or circuit 2; map the harness pinout deliberately in the product design.

## CAD and integration

- The record’s KiCad footprint is `Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical`, with pads 1 and 2 as through-hole contacts on the 2.00 mm pitch.
- The Zener module exposes the callable IO names `PIN_1` and `PIN_2`, mapped to the KiCad symbol pins `Pin_1` and `Pin_2`.
- Do not substitute a side-entry `S2B` part or the SMT `SM4-TB` family when the board placement requires this top-entry through-hole package.

## Sources

- [JST PH series product page](https://www.jst-mfg.com/product/index.php?lang=2&series=199)
- [JST PH series electrical and mechanical data PDF](https://www.jst-mfg.com/product/pdf/eng/ePH.pdf)
- [KiCad official JST footprint library](https://kicad.github.io/footprints/Connector_JST.html)