# ATMEGA328P-AU Datasheet Notes

Source PDF: Microchip `ATmega48A/PA/88A/PA/168A/PA/328/P` data sheet, DS40002061A.

## Identity

- Exact record target: `ATMEGA328P-AU`, the ATmega328P silicon in the AU suffix package.
- Package resolved as Microchip package code `32A`: 32-lead TQFP, 7 x 7 mm body, 1.0 mm body thickness, 0.8 mm lead pitch.
- This record models the MCU IC only. It does not model an Arduino Uno, Nano, carrier board, bootloader, USB interface, oscillator, or reset circuit.

## Evidence Notes

- Page 1 describes the AVR 8-bit MCU family, up to 20 MIPS at 20 MHz, 32 general-purpose registers, in-system self-programmable Flash, EEPROM, SRAM, timers, PWM, USART, SPI, and I2C-compatible two-wire interface.
- Page 2 lists 23 programmable I/O lines, 1.8 V to 5.5 V operation, -40 C to 85 C temperature range, and speed grades up to 20 MHz at 4.5 V to 5.5 V.
- Page 12 gives the ATmega48A/PA/88A/PA/168A/PA/328/P pinout. The 32 TQFP top view maps pins 1-32 to PD3, PD4, GND, VCC, GND, VCC, PB6/XTAL1, PB7/XTAL2, PD5, PD6, PD7, PB0, PB1, PB2, PB3, PB4, PB5, AVCC, ADC6, AREF, GND, ADC7, PC0, PC1, PC2, PC3, PC4, PC5, PC6/RESET, PD0, PD1, and PD2.
- Page 14 notes AVCC powers the ADC, PC3:0, and ADC7:6 and should be tied to VCC; AREF is the ADC reference; ADC7 and ADC6 are available on TQFP and QFN/MLF packages as 10-bit ADC channels.
- Page 636 gives packaging drawing `32A`: 32-lead 7 x 7 mm thin-profile plastic quad flat package (TQFP), JEDEC MS-026 variation ABA, with 0.8 mm lead pitch.

## Design Notes

- Provide local decoupling for each visible and hidden VCC/GND supply pair. Treat AVCC as a supply pin and filter it if ADC performance matters.
- Use ADC6 and ADC7 as analog-input-only pins in the TQFP package.
- PB6/PB7 are XTAL pins when an external crystal/resonator is used; internal oscillator designs may free them according to firmware fuse configuration and board requirements.
- PC6 is the reset pin unless reset is disabled by fuse configuration; leave reset programming/debug access in production designs.