Datasheet docs

Diodes Incorporated

TL431/TL432 Adjustable Precision Shunt Regulator

Three-terminal adjustable precision shunt regulator with 2.5V to 36V programmable output and up to 100mA sink current.

Voltage Reference / Shunt RegulatorTL431/TL432SOT23, SOT25, SO-8

Description

The TL431 and TL432 are three terminal adjustable shunt regulators offering excellent temperature stability and output current handling capability up to 100mA. The output voltage may be set to any chosen voltage between 2.5 and 36 volts by selection of two external divider resistors.

The devices can be used as a replacement for zener diodes in many applications requiring an improvement in zener performance. Diodes’ TL431 has the same electrical specifications as the industry standard ‘431 and is available in 2 grades with initial tolerances of 1% and 0.5% for the A and B grades respectively.

Features

• Temperature range -40 to +125ºC

• Reference Voltage Tolerance at 25°C

• TL431A: 2.495V ± 1.0%

• TL431B: 2.495V ± 0.5%

• Low Output Noise

• 0.2Ω Typical Output Impedance

• Sink Current Capability: 1mA to 100mA

• Adjustable Output Voltage: VREF to 36V

• All devices are:

Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)

Applications

• Opto-Coupler Linearisers

• Shunt Regulators

• Improved Zener

• Variable Reference

Pin Assignments

TL432

Notes:

  1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

  2. See http://www.diodes.com/quality/lead\_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free.

  3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

Absolute Maximum Ratings (Note 4)

SymbolParameterRatingUnit
$V_{KA}$ Cathode Voltage40V
$I_{KA}$ Continuous Cathode Current150mA
$I_{REF}$ Reference Input Current-0.050 to +10mA
$T_J$ Operating Junction Temperature+150°C
$T_{ST}$ Storage Temperature-55 to +150°C
$P_D$ Power Dissipation (Notes 5, 6)SOT23330mW
SOT25500
SO-8*700

Notes: 4. Operation above the absolute maximum rating may cause device failure. Operation at the absolute maximum ratings, for extended periods, may reduce device reliability. Unless otherwise stated voltages specified are relative to the ANODE pin.
5. TJ, MAX =150°C.
6. Ratings apply to ambient temperature at 25°C.

Recommended Operating Conditions

SymbolParameterMinMaxUnit
$V_{KA}$ Cathode Voltage $V_{REF}$ 36V
$I_{KA}$ Cathode Current1100mA
$T_A$ Operating Ambient Temperature-40+125°C

Electrical Characteristics $( { \bar { \mathsf { T } } } _ { \mathsf { A } } = + 2 5 ^ { \circ } { \mathsf { C } } ,$ unless otherwise noted)

SymbolParameterTest ConditionsMinTyp.MaxUnit
$V_{REF}$ Reference voltage $V_{KA} = V_{REF}, I_{KA} = 10mA$ TL431A2.4702.4952.520V
TL431B2.4822.4952.507
$V_{DEV}$ Deviation of reference voltage over full temperature range (Note 5) $V_{KA} = V_{REF}, I_{KA} = 10mA$ $T_A = 0 to 70°C$ 616mV
$T_A = -40 to +85°C$ 1434
$T_A = -40 to +125°C$ 1434
$\frac{\Delta V_{REF}}{\Delta V_{KA}}$ Ratio of the change in reference voltage to the change in cathode voltage $I_{KA} = 10mA$ $V_{KA} = 10V to V_{REF}$ -1.4-2.7mV/V
$V_{KA} = 36V to 10V$ -1-2
$I_{REF}$ Reference input current $I_{KA} = 10mA, R1 = 10KΩ, R2 = ∞$ 14μA
$\Delta I_{REF}$ $I_{REF}$ deviation over full temperature range (Note 7) $I_{KA} = 10mA, R1 = 10KΩ, R2 = ∞$ $T_A = 0 to 70°C$ 0.81.2μA
$T_A = -40 to +85°C$ 0.82.5
$T_A = -40 to +125°C$ 0.82.5
$I_{KA(MIN)}$ Minimum cathode current for regulation $V_{KA} = V_{REF}$ 0.40.7mA
$I_{KA(OFF)}$ Off-state current $V_{KA} = 36V, V_{REF} = 0V$ 0.050.5μA
$|Z_{KA}|$ Dynamic output impedance (Note 8) $V_{KA} = V_{REF}, f = 0Hz$ 0.20.5Ω
$θ_{JA}$ Thermal Resistance Junction to AmbientSOT23380°C/W
SOT25250
SO-8*70

Notes: 7. Deviation of VDEV, and ΔIREF are defined as the maximum variation of the values over the full temperature range.
The average temperature coefficient of the reference input voltage αVREF is defined as:

Where:

$\mathsf { T } 2 - \mathsf { T } 1 = \mathsf { f u l l }$ temperature change.

αVREF can be positive or negative depending on whether the slope is

positive or negative.

Notes: 8. The dynamic output impedance, $\mathsf { R } _ { { Z } } ,$ , is defined as:

$$
\left| Z _ {K A} \right| = \frac {\Delta V _ {K A}}{\Delta I _ {K A}}
$$

When the device is programmed with two external resistors R1 and R2, the dynamic output impedance of the overall circuit, is defined as:

$$
\left| Z ^ {\prime} \right| = \frac {\Delta V}{\Delta I} \approx \left| Z _ {K A} \right| \left(1 + \frac {R 1}{R 2}\right)
$$

Figure 1. Test circuit for $v _ { K A } = v _ { R E F }$

Figure 2. Test circuit for $\mathsf { V } _ { \mathsf { K A } } > \mathsf { V } _ { \mathsf { R E F } }$


Figure 3. Test circuit for IOFF

Typical Performance Characteristics


Off-State Cathode Current vs. Free Air Temperature


Ratio of Delta Reference Voltage to Delta Cathode Voltage vs. Free Air Temperature

Typical Performance Characteristics (cont.)


Equivalent Input Noise Voltage vs. Frequency


Figure 4. Test circuit for noise input voltage

Small-Signal Voltage Amplification vs. Frequency

Typical Performance Characteristics (cont.)


Test circuit for voltage amplification


Test circuit for reference impedance

Typical Performance Characteristics (cont.)


Test Circuit for Curve A

The device is stable under all conditions with a load capacitance not exceeding 50pF. The device is stable under all conditions with a load capacitance between 5nF and 20nF. The device is stable under all conditions with a load capacitance exceeding 300nF. With a cathode current not exceeding 5mA, the device is stable with any load capacitance.

Applications Information


Shunt Regulator


Rb - Optional to provide minimum cathode current Output Control of a Three Terminal Fixed Regulator


Series Regulator
Single Supply Comparator with Temperature Compensated Threshold

$$
\text { Low Limit } = \left(1 + \frac {\mathrm{R1B}}{\mathrm{R2B}}\right) \mathrm{V} _ {\mathrm{REF}}
$$

$$
\text { High Limit } = \left(1 + \frac {\mathrm{R1A}}{\mathrm{R2A}}\right) \mathrm{V} _ {\mathrm{REF}}
$$

Over Voltage / Under Voltage Protection Circuit

Ordering Information

DevicePackage CodePackaging (Note 9)7” Tape and ReelAmmo Box
QuantityPart Number SuffixQuantityPart Number Suffix
TL431A(B)SA-7SASOT233000/Tape &amp; Reel-7NANA
TL431A(B)W5-7W5SOT253000/Tape &amp; Reel-7NANA
TL431A(B)S-13*SSO-8*2500/Tape &amp; Reel-13NANA
TL432A(B)SA-7SASOT233000/Tape &amp; Reel-7NANA

* Suffix “B” denotes TL431B device.
Notes: 9. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.

Marking Information

(1) SOT23

( Top View )

3

XX : Identification code

Y : Year 0~9

XX Y W X

W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week

1 2

X : A~Z : Green

DevicePackageIdentification Code
TL431ASASOT23AA
TL431BSASOT23AB
TL432ASASOT23BA
TL432BSASOT23BB

(2) SOT25

( Top View )

5 47

XX : Identification code Y : Year 0~9

XX Y W X

W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week

1 2 3

X : A~Z : Green

DevicePackageIdentification Code
TL431AW5SOT25AA
TL431BW5SOT25AB

(3) SO-8*

(Top View)

Package Outline Dimensions (All Dimensions in mm)

(1) Package type: SOT25

SOT25
DimMinMaxTyp
A0.350.500.38
B1.501.701.60
C2.703.002.80
D——0.95
H2.903.103.00
J0.0130.100.05
K1.001.301.10
L0.350.550.40
M0.100.200.15
N0.700.800.75
$\alpha$ $0^{\circ}$ $8^{\circ}$ —
All Dimensions in mm

(2) Package Types: SOT23

SOT23
DimMinMaxTyp
A0.370.510.40
B1.201.401.30
C2.302.502.40
D0.891.030.915
F0.450.600.535
G1.782.051.83
H2.803.002.90
J0.0130.100.05
K0.9031.101.00
K1--0.400
L0.450.610.55
M0.0850.180.11
$\alpha$ $0^{\circ}$ $8^{\circ}$ -
All Dimensions in mm

Package Outline Dimensions (All Dimensions in mm)

(3) Package Types: SO-8*


Detail ‘A’

SO-8*
DimMinMax
A-1.75
A10.100.20
A21.301.50
A30.150.25
b0.30.5
D4.854.95
E5.906.10
E13.853.95
e1.27 Typ
h-0.35
L0.620.82
θ0°8°

All Dimensions in mm

IMPORTANT NOTICE

  1. DIODES INCORPORATED AND ITS SUBSIDIARIES (“DIODES”) MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

  2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes products. Diodes products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of the Diodes products for their intended applications, (c) ensuring their applications, which incorporate Diodes products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications.

  3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities.

  4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes website) under this document.

  5. Diodes products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

  6. Diodes products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws and regulations. Should customers or users use Diodes products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application.

  7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes.

  8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. Y

Copyright © 2021 Diodes Incorporated

www.diodes.com

Extracted Images

Figures and diagrams from the PDF

Preview the extracted datasheet assets and open any image in a separate tab for closer inspection.

Cathode current versus cathode voltage

Cathode current versus cathode voltage

SOT23 package dimensions table

SOT23 package dimensions table

Package lead profile and seating-plane dimensions

Package lead profile and seating-plane dimensions

Off-state cathode current versus free-air temperature

Off-state cathode current versus free-air temperature

Absolute maximum ratings table

Absolute maximum ratings table

SOT25 package dimensions table

SOT25 package dimensions table

Temperature characteristic showing VDEV between Vmax and Vmin

Temperature characteristic showing VDEV between Vmax and Vmin

Impedance relationship equation

Impedance relationship equation

TL431-style adjustable shunt regulator circuit

TL431-style adjustable shunt regulator circuit

Absolute maximum ratings table

Absolute maximum ratings table

TL431X package marking and pin numbering diagram

TL431X package marking and pin numbering diagram

Device packaging and ordering information table

Device packaging and ordering information table

SO-8 package dimensional table

SO-8 package dimensional table

Zener reference circuit test schematic

Zener reference circuit test schematic

TL431 and TLE2027 amplifier test circuit

TL431 and TLE2027 amplifier test circuit

Small-signal voltage amplification versus frequency

Small-signal voltage amplification versus frequency

Equivalent input noise voltage versus frequency

Equivalent input noise voltage versus frequency

Stability boundary conditions versus load capacitance

Stability boundary conditions versus load capacitance

Low-limit voltage formula

Low-limit voltage formula

Temperature coefficient formula

Temperature coefficient formula

Reference device test circuit

Reference device test circuit

Input and output voltage timing waveform

Input and output voltage timing waveform

Reference impedance versus frequency

Reference impedance versus frequency

Device package identification code table

Device package identification code table

Shunt regulator circuits showing higher-current configuration

Shunt regulator circuits showing higher-current configuration

Package mechanical dimension drawing

Package mechanical dimension drawing

Device package identification table

Device package identification table

Reference voltage versus free-air temperature

Reference voltage versus free-air temperature

Cathode current versus cathode voltage

Cathode current versus cathode voltage

Dynamic cathode impedance formula

Dynamic cathode impedance formula

TL431 adjustable shunt regulator circuit

TL431 adjustable shunt regulator circuit

Pulse response test circuit

Pulse response test circuit

TL431 pinouts for SOT23, SOT25, and SO-8 packages

TL431 pinouts for SOT23, SOT25, and SO-8 packages

Equivalent input noise voltage over time

Equivalent input noise voltage over time

TL431 SOT23 pinout

TL431 SOT23 pinout

TL431 electrical characteristics table

TL431 electrical characteristics table

TL43XXX-7 ordering code options

TL43XXX-7 ordering code options

Adjustable shunt regulator application circuit

Adjustable shunt regulator application circuit

Shunt reference connection diagram

Shunt reference connection diagram

Reference device test circuit with load and capacitor

Reference device test circuit with load and capacitor

SOT package mechanical dimensions

SOT package mechanical dimensions

Discrete shunt regulator circuit with transistor output

Discrete shunt regulator circuit with transistor output

Reference circuit with VKA supply, resistor network, capacitor, and reference device

Reference circuit with VKA supply, resistor network, capacitor, and reference device

Package mechanical dimension drawing

Package mechanical dimension drawing

High-limit reference-voltage equation

High-limit reference-voltage equation

Package side-view mechanical detail

Package side-view mechanical detail

Reference current versus free-air temperature

Reference current versus free-air temperature

Reference-voltage temperature coefficient versus free-air temperature

Reference-voltage temperature coefficient versus free-air temperature

Input-controlled circuit showing off-state current and VKA.

Input-controlled circuit showing off-state current and VKA.

Input/output threshold circuit with V+ supply.

Input/output threshold circuit with V+ supply.

Top-view package outline with eight leads and dimensional markers.

Top-view package outline with eight leads and dimensional markers.

Agent APIs

Use this datasheet from any agent

Send the page, markdown, chunks, or search endpoint to ChatGPT, Claude, embedr-app, or your own tooling.